Sector 55 Blues - Prog 9 - Scav City and the Pirate King

Sector 55 Blues is a Judge Dredd Campaign using the Savage Dredd unnofficial Savage Worlds Expansion.  This is an online only game with members from Dragons Keep Roleplay Club.

Onward to Scav City 

With Black Ice Kanga and Toecutter riding in their land dinghy Judges Cully, Hammer, Teal and Uhtred ride due south in search of Scav City and the Pirate King.  As they ride they notice that they are being stalked by large dog shaped creatures which periodically reveal themselves on the dune tops both East and West of them.  When asked Kanga says "they're Rad Dogs, like big wolves, dangerous at ground level and smart, real smart.  They hunt in packs."

After 3 hours it begins to get dark and the team decide to stop and make camp.  Teal puts the bikes on overwatch mode set out at cardinal points.  They pitch their tends in a smaller circle with the pirate dinghy in the middle and settle in for the night.  

Several times throughout the night the bikes radar is triggered and on one occasion Hammer's bike fires off 12 rounds from its bike cannon.

In the morning Hammer checks what his bike was shooting at.  Nothing, just a patch of dune which took the cannon burst and collapsed in a landslide.  They pop their Rad Pills, eat some ration bars, pack their tents and head out.  

Day Two

The morning goes without incident, the Rad Dogs are still following them.  At noon they see a cloud of dust and smoke ahead, a vehicle heading South.  Keeping pace with the dinghy it takes an hour for them to catch up to a ragged looking bus filled with fleeing refugees.  The bus slows to a stop and a short stumpy mutant gets out pleading for help.  

 

Mutieville Refugee Bus

 

He explains they have just escaped Mutieville and they have wounded on board.  The Judges agree to help and Cully administers first aid using her med kit.  The muties reveal that they escaped Mutieville a week ago, fleeing for their lives.  They lost three of their party, Harry, Dutch and Benjy to Lord Muldoons Hair Beast trackers.

 

Two days ago they ran into a pirate ship.  A huge wheeled monstrosity with a big skull for a figurehead.  They were attacked and five of their party were wounded but suddenly the pirates called off the attack and drove off East.  They are heading to Barter Town, the only free town left now that Mutieville is in the hands of Muldoon.  There are no menfolk left to defend it and they women, old people and children who remain are completely at the mercy of Lord Muldoon.  All the able bodied men have been taken to Black Oil Mesa to work the oil fields.

 

After patching up the wounded the bus departs and the Judges continue their journey until nightfall when they make camp just like last night.

 

Five hours after dark all hell breaks loose.  Hammer's bike fires off a sustained burst of cannon fire at something fleeing to the the West.  Langa bursts into Cully's tent screaming "They got the Toecutter... Dinosaur...  snatched my... first mate.

 

Hammer jumps on his bike and fires the cyclops laser into the darkness.  The laser melts a channel through the dunes like a hot knife through butter.  It illuminates the dunes and the Judges get a  brief glimpse of a pair of Rad Dogs howling atop one of the dunes 300ft away.  Returning to her tent Cully discovers a terrified Kanga cowering in fear.  

 

Slapping him across the face as directed in section 215 of The Book of Law (Disaster Response and Civillian Casualties) she shouts at the visibly traumatised pirate "Pull yourself together you scurvy dog, are you positive it was a dinosaur?"

Hammer and Teal examine the bird like three toed tracks which came from the South, made a beeline for the pirates and then a 90 degree turn exiting East.  A trail of blood accompanies them and as they enter the dunes they find a severed human leg bitten off at the thigh.  Whatever took Toecutter was big and fast.  Even if they could find Toecutter in the darkness he would have bled to death in minutes.  

 

The team decide to abandon the dinghy and ride through the darkness with Kanga riding pillion on Teal's bike.  As the sun rises over the horizon the rusty tangled scrap heap of iron that is Scav City looms in the distance.

 

Scav City

An Audience with The Pirate King  

The bulk of Scav City is not a permanent fixture rather it is a jumpled mess of pirate ships clustered around a central fortified tower.  The Tower itself is protected by ramshackle walls made from scrap iron and cars with a large oil filled moat encircling it.  The walls are festooned with spikes and sharp rusty iron blades making it look like a hedgdehog squatting in the desert. 

 

As the Judges ride over the drawbridge they are surrounded by armed pirates brandishing swords, spears, harpoon and crossbows.  A man carrying a ping laudry basket orders them to put their weapons in the basket.  "Noone sees the Pirate King carrying a weapon... It is the Pirate Law!!"  

Teal makes a point of telling the man that if anyone touches his gun other than him... "it will go boom!!"

The Pirate King

The Judges are led into the tower and into a throne room lit by hundreds of oil lamps and candles.  On the throne sits an old pirate.

 

"Welcome Law Men.  Thank you for returning Kanga to me, I will deal with him later, but first I want to raise a glass and discuss what you are doing in the Cursed Earth.  Yo Ho Ho a bottle of Rum"

 

"Yo Ho Ho, fetch a bottle of rum and five glasses!!"  he shouts at one of his attendants who scurries off and returns with a shiny chrome car hubcap carrying 5 shot glasses and a bottle of rum.

 

"Everybody out!!  I will parley with the Lawmen alone." bellows the Pirate King.

An Old Judge and a New Law

With the room cleared the Pirate King explains his problem.

 

"Muldoon is a threat to Scav City.  He's taking over this part of the Cursed Earth and we don't have the firepower to defend ourselves.  There's an old lawman outpost North of here.  If you were to gain access with my men then we could get weapons and defend ourselves."

 

Judge Hammer thanks the Pirate King and extends a hand in the universal sign of friendship.  The Pirate King does likewise and Hammer grabs his hand turning it over to reveal the fading Justice Department ID tattoo on the back.

 

"You are a Judge!" Hammer exclaims.  "A long time ago maybe, but I learned that you can't teach Mega City Law to the Lawless.  You need a new Law.  Pirate Law.  I am old and won't be around for much longer and I need someone who can replace me.  Think you got the cojones boy?"

 

"Twenty men and two ships crewed by my best captains.  What do ya say? Do we have a deal?"

 

The Judges ponder their a situation.  Muldoon has the perp and perhaps the outpost has equipment they can use to get in and neutralize Muldoon and exfiltrate Nesbitt.  They reluctantly agree.

A Pirate Shindig

With a deal struck the doors to the throne room are opened and a throng of pirates enters bringing food and drink.  The Judges are introduced to the two captains who will be accompanying their expedition Scurvy Jack and El Diablo.  

 

As the revelries continue Teal notices one shadowy figure who appears to be surfing tables grabbing half finished drinks.  He corners the figure and engages him in conversation.

 

"The names, Cross Eyed Jethro.  I knows Muldoon's secret, He's like you from the Mega City.  Get me on your excursion and I will tell you everything.  The Pirate King has never met Muldoon, but I know him well." 

 

Teal tells the Pirate King that he wants Jethro on the expedition to which he agrees.

Next Prog ->

Back Issues

Prog 1 - Suits You Sir - Mosh 55 rob Zlooty Slute's Suits You and a body is discovered.

Prog 2 - Hair Today Gone Tomorrow - Rock Dwayneson's apartment and carnage at the Yes-A-Bout

Prog 3 - It's Ugly Out There - Fun and Games at the Ugly Pageant 

Prog 4 - Down, Down, Deeper and Down - Entering the sewers under RESYK

Prog 5 - The Big Wig - Confronting the beast below the city

Prog 6 - Last Orders at The Two Ways Pub - A shootout in Sector 163

Prog 7 - Into the Cursed Earth - Judge Ezquerra orders a manhunt 

Prog 8 - Avast Me Hearties It's the Easter Pirate Kangaroo - Black Ice Kanga

I Printed a Grail Item - Judge Dredd Helmet

When I got my new printer I knew that there were a few grail items that I've always wanted to own but was too afraid to print.  

I am running a Judge Dredd campaign for my Friday night role play club in South East London (Dragons Keep Roleplay Club), so I took the plunge and printed a Judge Dredd Helmet.

My 3D Printed Judge Dredd Helmet

Cutting up the STL File Using Meshmixer

I downloaded a model from thingiverse by user 3DPrintSolutions which had been cut into 4 parts but still was too big for my 200mm square print bed.  The solution was to download meshmixer and split each print in half again for a total of 8 parts.  These would then go together in two rings of four parts each.

Help I Need Some Support... Material

The bottom ring had virtually vertical walls so I opted to print without support material and arranged the prints on the bed to minimize any stringiness which was largely avoidable.  I knew I would have a lot of clean up so a few dody edges could be fixed with bondo in post processing.  This got the print time down to just under 4 hours each.

The upper ring is mostly dome so I new I was going to need a lot of support.  The first print I did had support set to 15 in Cura and this took over 10.5 hours to print.  Reducing this to 5 got the other three parts to print in between 7 and 8 hours each but did result in a bit of loose stringing on the inside.  As they say "it don't need to glow if it ain't on show"

Lots of support needed to print the domes

You can see why I was reticent to start a project like this.  With nearly 60 hours of printing (including the odd failure) it is my biggest print to date both in size and in time.

Judge Dredd Helmet - 8 Parts Printed

Filament, God Awful Filament

I've had this PLA filament knocking around since January last year and one reel has been open to the elements all that time.  This is probably not the best PLA to use, but it's what I've got and it needs to be used up.  I've never been one for colour matching filament and this filament is a gorgeous shade of poo, I mean chocolate brown. 

The finished print is going to need a skim coat of plastic body filler to smooth out the layer lines so the filament colour is completely irrelevant in any case.

The other thing with this filament is it needs to be hot, 220 degrees hot and I printed some of the earlier prints at 210 which caused some under extrusion which needed fixing. I pulled out the trusty 3D Pen which is ideal for this sort of touch up work and started meshing in some extra plastic SANAGO style.  I also resorted to the old superglue and baking powder trick to fill some of the more heinous gaps in the print and give the cracks some filling.   

My old man was raving about some glue he had bought recently and so he sent me a care package from Amazon.  It ended up being Mitre Bond Superglue & Activator which I had been trying to find on eBay and Amazon for ages but didn't know what to search for.  Apparently accelerator is not the right phrase.

Assembly and Post-Processing

I assembled the first two prints before the third had even come off the printer as I was anxious to see if the parts had warped during printing.  Everything was okay, well reasonably okay, fixable okay and so I held off further assembly until all the parts were printed.  I taped the parts together in the interim to give me a psychological boost to keep going and to also get a handle on just how big this is.  

Judge Dredd Helmet - Taped Together

I think that this is incredibly important, especially when you have prints that fail inexplicably and you have to restart a 30 or 40% complete job twice over.  3D printing is not a fire and forget process and I learned quite a bit about my new printer in the process.  This is only its third or fourth project and even though it is almost identical to my previous Prusa i3 homage, it's a little bit different in construction and behaves slightly differently.  It is as much about dialling in the user as it is dialling in the printer. 

Post processing is a laborious and crappy job.  Another reason why I put off printing something so large.  Fortunately this model is large areas of smooth surface with gentle curves rather than lots of fiddly detail and tight tolerances.

The bloke who glued the parts together (me) did a crappy job and so I had to use plenty of bondo (car body filler) to smooth out all the joints between the parts and fill in the layer lines on all surfaces.

Somebody Closed My Halfords!!!

A slight rant here but I wandered down to my local Halfords which is 10 minutes walk from my house.  I say IS but I should mean WAS as thanks to COVID, the powers that be decided to close the store for good and it is now a DREAMS Bedstore.  Now I am sure that they had sound financial reasons for it but it does mean that there is now no consumer auto spares store in Orpington.  So rather than drive to the nearest alternative store which would be in Bromley I did what 99% of the population are going to do.  I bought it cheaper off Amazon or eBay.  

I think there is a morale in this tale about the death of the high street but I can't for the life of me guess what it is. 

Judge Dredd Helmet - Big Boy Bondo Time!

 
I also smoothed out the inside surfaces adding a bit of thickness to the entire helmet but mostly the bondo was needed to level out the discrepencies between the different sections where they meet like the four corners monument. 

 

Once you've applied the bondo get ready for a lot of sanding.  Use a sanding block to make your life easy.  I bought mine at poundland years ago and it is the first time I can hand on heart say it was an indispensable tool.  I could have spent months sanding the surface to get that perfect finish but lets face it I'm an impatient sort of guy and I wanted this helmet finished before my game ended or lockdown was lifted.

Painting Your Helmet

I went the cheap and easy route using black matt and gloss car paint bought from poundland and a red gloss from Wilkos.  All in the paint cost me less than a tenner.  The gold paint was a bottle of miniature paints gold which I have had for the best part of 25 years and it is still good.

Once you have done this you just need to fit the visor.

The Visor

There seem to be two types of thought on visors either stay true to the comic book and half a two tone visor or go with the Dredd movie look which is all black.

The model also comes with a printed visor which to be honest is probably a good thing as it ensured correct alignment of the nose guard X during assembly.  This was removed once the helmet was complete and replaced with one a sheet of acetate covered with one way black film.  After all you can't have the perps seeing your eyes (or in my case my spectactles).

Comic Book or Dredd movie visor (which do I choose)

The concesus also seems to be that the best way to replicate this is by buying cheap motorcycle visors from ebay and hot gluing them in.  The only problem with this is size.  Motorcycle visors are meant to go on the outside of a helmet not the inside so the curvature is all wrong.  I also had no idea what size I needed so I just went for a JDC one size fits all visor (eBay / Amazon).

I cut out the eye holes with my knock off dremel using an abrasive cutting wheel.  I cannot stress how important it is to wear a safety glasses when doing this.  The little cutting wheels have only one mission in life and that is to shatter fling shards of abrasive right in your face.  Fortunately I only managed to break one "Wheel of Death" and with the eyeholes removed I made a paper pattern adding a generous half inch to all sides but the bottom.  I used spray adhesive to stick this to the visor on top of the removable plastic scratch cover and then dremeled it out.  

As you can see in the picture below I stuck this on upside down.  The visor has a curved bottom edge and a flat top edge.  You want the top edge to form the exposed edge of the visor on your Dredd helmet.

Paper template stuck on visor upside down.  Just big enough

Interior Padding 

This was a relatively easy job just hot gluing in sections of EVA foam tile.  This is a cosplayer's go to material and can be bought as workshop flooring or playmat flooring inexpensively on Amazon or eBay. 

Interior reinforcement and padding with EVA foam floor tiles

How Much did this 3D Printed Judge Dredd Helmet Cost Me?

Here's an estimate of the costs

• Filament - £15
  
• Electricity - £10
  
• Bondo - £9
• Visor - £10
• EVA Foam - £8
  
• Sandpaper - £3
• Paint - £10
• Glue - £8 

That's a total of roughly £73 which is about the same price as a raw fiberglass cast helmet from eBay.  A finished helmet will set you back at least £150 and you don't have any of the enjoyment of getting there or the enormous sense of satisfaction when the project is complete.

I posted a couple of pics on Whattsapp and a friend immediately asked

"Can you make it reflect flames like in the Dredd movie?"

The answer is most definitely Yes.

So What Other Grail Items Are on my Bucket List?

I've already printed a Han Solo DL44 Blaster, one of my earliest prop projects and a Judge Dredd Badge.  I even did a custom one for one of my players in a previous Judge Dredd RPG campaign.

As a Sci-fi fan there are a number of iconic weapons that I 've always wanted to own including:

• An M41A Pulse Rifle from Aliens
  
• A Bladerunner Deckard Blaster
• A Lawgiver - there are 3 to choose from Comic Book / Judge Dredd (1995) or Dredd (2011)
  
• A Hellboy Samaritan revolver
  
• An Outlaw Star Caster Pistol (as used by Gene Starwind)
  

 I also want to print some of those iconic droids like

• A life size R2D2
• A C3PO head.
  
• An ABC Warrior Skull from the 1995 Stallone Movie Judge Dredd
• A life size Han Solo in Carbonite
  

But those are all going to have to wait until I've recovered enough to consider taking on a mega project like this again.

Reaper Bones #34 - Mangu Timur

Big dudes wearing plate are the stock in trade of epic fantasy tabletop Role Playing Games.

Mangu Timur - Bobby Jackson (SKU 77148) 

Mangu's got a big shield which gave me the opportunity to paint some planks.  He's also wearing some weird elven looking decorative hip guard over the top of his faulds (the little skirt which does all the hip and butt protecting).  I painted this antique gold but then felt that the viewers eye was drawn to the crotch area so gilded his pauldrons as well.  

Mangu Timur - Front

 

Mangu Timur - Back

Bones Progress

Newsround 28th to 4th April 2021

My weekly roundup of news and what I found on the internet.  

The King is Back

Godzilla vs Kong hit streaming services this week and I have to say I was impressed.  It's another installment in the Legendary Pictures franchise comprising of Kong: Skull Island, Godzilla, and Godzilla: King of the Monsters. 

Godzilla vs Kong - The long awaited match up

It doesn't dissapoint.

The CGI is top notch and the story line pretty bonkers, but what you really came to see this movie for is a straight up duel between the two biggest monsters in Hollywood history.  There is plenty of additional content to excite fans of Kaiju movies and without spoilers, this isn't just about the two biggest Titans duking it out.

An all star cast of quality actors provide exposition and never overshadow the real stars.  This is a winning formula for Legendary and produces an insane mind blowing visual spectacle of a popcorn movie which is what the real fans are after.

Evil Genius Economics 

In preparation for my current game at Dragons Keep Roleplay Club I had to invent an evil genius to be at the heart of the current problems that the city is experiencing.  

In order to wreak revenge on an epic scale you need to have epic resources and epic managerial skills.  Whatever your evil scheme is you will need to amass resources through various shell companies and have unwitting minions essentially funnelling cash into your organisation to keep the lights running at your secret volcanic island hideaway.

Not a supervillian lair and actually a Shopping Mall in the South of France

Being a costumed superpowered crusader on the other hand is usually a solitary affair and thwarting evil schemes is a simple case of turning up doing a bit of blasting and then off to the next encounter.  There isn't much in the way of investment required.

And then I found some playthrough videos of Evil Genius 2: World Domination.  The designers have clearly looked long and deep and consider all the vital aspects of the evil genius business model.  Worth a look if you are into your worker placement simulations.  Available to download on Steam 

If you aren't into computer games I can heartily recommend Mwahahaha! which is a 2 to 5 player boardgame which explores the same principles of resource gathering and minion management.  Published back in 2013 by White Wolf it is sadly out of print but copies can be snagged on eBay at a reasonable price.

Trailer for Rick and Morty Season 5 Drops

The long awaited season 5 trailer is out and it looks amazing.  As a fan of Combining Mecha anime such as Voltron (aka Beast King Go Lion) and 80s puppet show Star Fleet (aka X-Bomber) I am particularly looking forward to them exploring this trope. 

Rick and Morty is chock full of great ideas for role playing games.  No genre is left untouched from their hypercritical and synical gaze.  One of the best sci-fi comedy series in the multiverse.  

The new series on Sunday June 20th so yet another date for you to pop in your calendar.

Monthly Free D&D 5e Adventures from DM Dave

DM Dave Free D&D Adventures

Role Playing Games are a funny business to be in as it specifically appeals your creative side.  Once you have purchased the core rules for your system you and are actively encouraged to go off and write your own scenarios.  There is really not much incentive to keep buying core rulebooks. 

However, whilst I love this part of the hobby as it scratches my story writting itch, I understand how important it is to support small creators who are doing some amazing work.  Scalping everything for free doesn't keep the lights on for most publishers. 

In fact small publishers often do things for the love of the hobby are some of the most creative people out there which is another really good reason to lend them some financial support.

There are plenty of resources for the time poor DM such as Drive Thru RPG, DMs Guild or Dragonsfoot and one such creator is DMDave who publishes a host of Dungeons & Dragons materials via his Patreon subscription.  

These are really high quality productions and feature battle maps by Miska's Maps, additional monster stat blocks and magic item cards.  I downloaded the Glaive of the Revenant King and this adventure is the real deal, a ready to run scenario.

Want a taste of how good his products are?  Just sign up to his mailing list and you will get a free D&D 5e scenario every month.

Sector 55 Blues - Prog 8 - Avast Me Hearties it be the Easter Pirate Kangaroo!

Sector 55 Blues is a Judge Dredd Campaign using the Savage Dredd unnofficial Savage Worlds Expansion.  This is an online only game with members from Dragons Keep Roleplay Club.

Judges Cully, Hammer, Teal and Uhtred gun their bikes North and the Lawmasters quickly outpace the scavengers.  about 30 minutes later they find a wide ramp on the East side of the canyon leading up and out.

Is that a Ship I See Before Me?

As the Judges make it out of the canyon and turn to the South they see a large vehicle belching black smoke approaching their position from the North.  Using the magnification of their gun scopes they see a ship trundling towards them it's figure head is a giant skull with three horns.  Aboard are a motley crew of 8 to 10 cannibal scavengers brandishing swords spears and crossbows. 

Black Ice Kanga's Pirate Land Ship - The Skull Duggery

Determined to get a closer look at the scavengers to determine if Rabies Nesbitt is among them, the ingenious Judge Cully straps her helmet to Teal's bike with surgical tape from Uhtred's medkit.  She patches her helmet cam through to her bike computer and Teal sends it on a recon mission.

 

They identify three masked figures and the recon mission turns into an attack run.  Teal's bike swoops in from the East side and blasts at the giant wheel with its Cyclops Laser and Bike Cannon melting a wide gouge into the spinning mass of iron.  The scavengers pepper the bike with crossbow bolts as it zooms past and the bike's auto preservation circuit kicks in bringing it to an abrupt halt.

Cully and Uthred with Teal riding pillion form a posse and ride out to meet the oncoming land ship.  Hammer does not move preferring to see how this plays out.  

Cully swoops in from the East strafing the unmasked crew members with her bike cannon and then picking off a few with her lawgiver.

Uthred swoops in from the West blasting the wheel with the bike's cannon doing some critical but not fatal damage.  The right hand wheel begins to wobble on it's axle.  The Cyclops Laser blasts a hole in the side of the ship and a skillfull Uthred pulls the bike in allowing the Judges to board the ship.

Cully swoops around to the rear and blasts at the remaining crew member on the port side of the ship.  "BUDDA BUDDA BUDDA" and her bike cannon shreds one of the smaller wheels under the belly of the beast.  The ship begins to veer left towards the canyon edge.  Hammer can almost see the whites of their eyes and with a twist of the throttle he engages the cannibal pirate ship blasting the wobbling wheel and strafing the left bank of small wheels taking out three.

Uthred and Teal quickly make their way out of the dark bowels of the ship up the stairs onto the main deck and teal shoots a musclebound pirate in the process.  Uthred fires a few rounds at what can only be described as a half man half kangaroo but does not deal a killing blow.  The creature effortlessley leaps the 20 feet over the balustrade landing a kick to Uthred's chest but the Judge is made of stern stuff and blocks the attack.

Cully fires a grenade round and plants it between two pirates on the sterncastle then opens up with all her bike weapons shredding the rear of the ship to matchwood.  With its support structure gone, the sterncastle deck collapses dumping one of the pilots on the ground and Cully leaps from her bike to engage the pirate in hand to hand.  Unfortunately she stuffs the landing and is stunned.

Hammer sweeps round and tears into the ship with his bike cannon felling the pirate at the ships wheel as the ship slowly grinds to a halt.

Uthred and the Kangaroo Captain trade punches as Teal shoots him with a GP round wounding him.

"I surrenders Law Man!" gasps the injured Captain Kanga "Parley, Parley.  What are your terms?"  

Black Ice Kanga

The captain of these scurvey dogs is Black Ice Kanga a heartless scoundrel who roams the high plains looking for shipwrecked travellers and other smaller pirate gangs.  What he catches he keeps and eats.  

Black Ice Kanga

 

Business has been tough these last few years as there's not much need for mutie flesh since Muldoon took over.

He tells the judges that he was hired to pick up the citizen and given specific instructions not to eat him.  

 

"A car came and picked him up.  It bore the insignia of Lord Vidal Muldoon.  You don't want to mess with him he's a vicious powerful overlord." 

 

He tells them that Nesbitt is one of Muldoons men and that they probably took him to Black Gold Mesa.  If the Judges launch an assault they will be cut to ribbons by Muldoon, he has too many men even for Judges.  

The Pirates of Scavcity had a non aggression pact with the freetowns but Muldoon wants to own it all.  He has already taken over Mutieville. 

 

He offers them a map of the region and says that the Pirate King will probably reward them for his safe return.  The Judges agree and he orders his remaining crew, first mate Toecutter, to launch the dinghy.

Recovered Map of The Cursed Earth

Next Prog ->

Back Issues

Prog 1 - Suits You Sir - Mosh 55 rob Zlooty Slute's Suits You and a body is discovered.

Prog 2 - Hair Today Gone Tomorrow - Rock Dwayneson's apartment and carnage at the Yes-A-Bout

Prog 3 - It's Ugly Out There - Fun and Games at the Ugly Pageant 

Prog 4 - Down, Down, Deeper and Down - Entering the sewers under RESYK

Prog 5 - The Big Wig - Confronting the beast below the city

Prog 6 - Last Orders at The Two Ways Pub - A shootout in Sector 163

Prog 7 - Into the Cursed Earth - Judge Ezquerra orders a manhunt