Can You buy Good Hobby Products from Wish.com in 2024?

Earlier this month I blogged about my experience buying hobby products from AliExpress in 2024, this time I turn my attention to Wish.com.

104pcs Simulation Static Grass Tufts Model Mini Grass Cluster - £4.06

My basing game has been pretty weak of late.  Trix Robot Rider needed some desert vegetation to add a little va va voom so I chose these mini grass tufts.  Herein lies the problem when you are buying stuff from Wish, you are entirely reliant on the chinglish descriptions that the vendors provide.  They often list multiple pack sizes or products in the same listing and sometimes it's hard to know what you are buying.  

The upside is of course at these stupidly low prices you can often order multiple different options all for less than the price if you were to go to a big box retailer like Hobby Craft.  If you want to try out a hobby product for not much outlay the online vendors on Wish.com are a fairly safe way to do it.

These tufts are quite small and measure 5mm in diameter.  This might be what the number 5 on the box refers to.  In their defence it does say mini... 

I added a few of them to Trix's base and I really think that they add a certain something.  

Perhaps on a smaller miniature base they would have much more impact.  I will try to buy some bigger ones in future. 

50pcs DIY Craft Party Alligator Clamp Wire Clip - £3.74 - 3/5

I had seen GroundAffected suspend his resin parts for priming on these alligator clips so I bought a bag of 50.  To be honest the clips are not really strong enough to safely hold larger parts but for small 32mm miniatures they are going to be a godsend. 

There are obviously 2 parts to any painting jig, the thing that attaches to the bit you are painting and the thing that that thing attaches to, lets call it a base.  Having a sturdy base is just as important  

Clearly I am going to have to design and print some sort of hobby clip base or print out something like this Alligator Clip Stand by retro-stingray.

If I were buying again I would opt for longer wires as I think the ones I bought were mainly designed as table card holders.

60g Six Colour Flock Adhesive Nylon Static Grass Powder - £2.51

Wow this is great value considering a similarly sized bag of grass from a well known retailer is 3 times the price and only comes in one colour.  I now need to build a static grass applicator like Luke Towan  

UV Resin - 50g UV Resin Ultraviolet Curing Epoxy Resin Crystal Clear - £1.28 5/5

I have wanted to try out some of this clear UV resin for a while.  I have a large bottle of the stuff for my 3D printer but it doesn't set quickly enough when making things like pools of lava or green ooze.  This little bottle was cheap enough that I don't care if it works that well.

I am glad to report that it works really well, just 5-10 seconds under my pretty weakass UV torch and it sets rock hard.  I have a big lava base project in the works and this will be just the ticket for greating that glossy flowing lava.

A DIY Funny Wooden Sailing Boat Model Kit 1/50 Scale Ship £5.42 - 0/5

I would love to say that this is an amazing model and a fun way to spend a Sunday afternoon, but I can't.  Sadly the vendor cancelled the order unilaterally.  This happens from time to time on Wish.com, often when the price is too good to be true.  

I've seen this kit on AliExpress so maybe I'll try another order... ooh a stirling steam engine!

Can you buy good modelling accessories from AliExpress in 2024?

I have been playing Wish and AliExpress bingo for a while now.  It can be a dangerous game, but if you've got a few quid that are burning a hole in your pocket, there are worse ways to spaff it up the wall. 

Now this isn't one of those exercises.  I genuinely needed some specific items and thought I would put each store to the test.

HobbyMio Sci-Fi Decals (maybe a bit of a Gundam theme here) - £1.83 - 4/5

You may have seen my recent print of Trix Robot Rider on these pages.  I'm really happy how she came out but the robot hand is crying out for some decals.  I had a look on AliExpress and was stunned by the sheer volume of waterslide decals that are available at some extremely good prices.  Most of these are replacements for specific Gundam kits but there are some which are just generic.  

I chose the HobbyMio Model Decal Vol 1 set and I'm really impressed with the diversity of symbols warning signs numbers which come in the set.  They are a mix of black, white, red and yellow with plenty of variety to sticker up your robot.  I'll update this post when I've used some to let you know how they come out and how easy they are to lay down.

12Pc Set 21x15cm Leopard Print Grafitti Stencils - £4.21 - 3/5

When I painted the wings of my Ulimate Radical Centrist B'lakor Demon, I used an old orange bag as stencil mask to get a diamond pattern.  It was okay, but very fiddly and I had seen some of the AFV modellers on YouTube using some splatter masks so thought I'd try one.  

I think I ordered the wrong thing as these are considerably larger than I expected.  With 12 different patterns to choose from these are still very useable for bigger models.  In the set are a:

• Leopard Spots - each spot ranges from 1 to 2cm 
• Waves - 11 different wave patterns should look good for water effects or Chris Foss inspired shampoo bottle spaceship patterns
• Bubbles - well I don't know how to describe this stacked bubble design.
• Large Tiger Stripes - again very useable if you are doing a tiger striped camo theme on a vehicle.
• Voronoi - small holes measuring 1 to 1.3cm across.  Very useable for dragon hide or interior wing patterns.
• Square Cells - an irregular collection of 4 sided holes with rounded corners.  This is going to be an absolute must for that cracked earth look.
• Large Zebra Stripes - same as the Tiger stripes
• Lizard Skin - a tighter mesh of diagonal holes.  Great for any large lizard (wink, wink)
• Squished Lizard Skin - a mesh of varying sized organic shaped diamonds large on the edge to tiny in the middle.  this is going to get a lot of use I can tell.
  
• Rust Splatter - that collection of irregular shapes which the AFV guys go wild for 
• Swoopy Curves - this is less useable in my opinion and will probably see action when I just want to define a swooping curve in much the same way you might use a french curve.
• Large Irregular Cells - again this is likely to see use in large base texture shading.

I will give them a whirl on my next 3D printed mega project which is currently staring at me with it's five fearsome heads.

Hobby MS Small Wet Pallette Set - £3.59 4/5

I've always wanted to try out a wet palette, but they are kind of intimidating and come in at around £20 or so.  I thought I'd try out one of these little travel palettes to see how I get on.

The box measures 21cm x 7cm and has two compartments, one for the palette and the other I am guessing is a water supply section.  Included are 10 sheets of "baking paper", two absorbent blotters, a thick white foam pad and a strange square metal grill.

I will have to learn how all of this goes together and how to use it as it did not come with instructions, but I did find this video on how to use it.

I'll report back with my findings...

Postage Not Included

The total I paid for all three items was only £15.83 so that was £6.20 for flat rate shipping and delivery took just shy of 8 calendar days.

Given that a pint in a london pub in 2024 is about £10 these days I think I'll try this again.  Tune in again soon for a review of some Wish.com model making goodies.

Jessie's Prints - Episode 34 - Teenage Mutant Sorceror Tortle

This week, I are mostly been printing... A Tortle!!

Epics N Stuff Tortle Sorceror - MyMiniFactory - 109539  

This week saw us return to The Rivenlands D&D Campaign at Dragons Keep Roleplay Club.  My clubmate and fellow founder Paul needed a mini to represent his Tortle Sorceror so he commissioned me to print and paint a supplied STL. 

He's a chunky boy and basically pyramidal in shape.  The mini came both pre-supported and unsupported, as is common these days.  However, he also came as a pair of pre-hollowed out variants for those wishing to not waste resin or just wanting a slightly lighter mini.  

This is the first time I've seen this done on a 35mm single piece character mini, so I printed a hollow one for shits and giggles.  The only issue I had is that the wall thickness just wasn't thick enough to prevent the odd hole appearing when I removed the supports. 

Painting

The customary zenithal priming was done and mounted to my base of choice (a two pence piece).  I said he was chunky and barely any base was visible under his girthy feet.

Paul supplied me with a photo of a make by Empire of Minis so I didn't even have to make any colour choice decisions. 

Base colours were a mix of Vallejo Acrylics, with midtones dry brushed on before picking out the highlights.

Serious Skin Problems

I really struggled with the skin on this model, in fact it was practically the last thing that got painted.  The sculpt had no texture and yet he is supposed to be a tortoise like humanoid.  Last time I looked they had pretty scaly lizard like skin and his was as smooth as a baby's bottom.  I have a small collection of greens and they were covering really horribly over the zenithal, particularly where areas of shadow were converned.

 

I persevered though and resorted to mixing in a bit of some Crafter's Choice acrylic that I found in a Wallington "Arkwrights" shop.  

G.. G.. G.. Granville! Fetch me that tube of G... G.. G... Green Paint!

This stuff is so random it doesn't even have a paint name, just a number (PNTA-134) but it's made by Royal & Langnickel and it did the job where my specialist miniature paints could not.  

 

This just goes to show that when you are painting don't just dismiss your art materials because they aren't Vallejo or Games Workshop.  Try out lots of different paints and you just might hit on some secret sauce.

Vallejo Shifters - It's all Dust Baby!

In 2023 I managed to snag an absolute bargain of an eBay joblot. I got a metric ton of airbrush paints including this trio of Vallejo Shifters sets.

I've used them on a few models so far but my main gripe is that the supplied swatches don't at all marry up to my experience.  I decided to make my own swatches and to test if it using a gloss black undercoat made any difference to the effect. 

Before anyone shouts "You should have used spoons!", I probably should but my main objective was to have something I could tuck into the box as a handy reference and not have to dig out my cutlery drawer.  Some of these paints don't look anything like what is in the bottle and their names are no help either.

Galaxy Dust

• 77.002 Light Violet Green - A minty coldish green which flips to a greyish purple at about 20 degrees.
  
  
• 77.008 Green Gold Cold Blue - A nice verdant green which flips to a dark blue.
  
  
• 77.009 Turquoise Violet - A really nice 70s blue flake flipping to a solid purple with flecks of irridescent blue. This is the standout colour of the set.
  
  
• 77.010 Emerald Green Mauve - a darker more blueish green flipping to purple.
  
  
• 77.017 Green Silver Blue -almost identical to 002 but a bit more opaque to begin with before flipping to a much greyer colour.
  
  
• 77.018 Dark Green Tin -a really nice warm green which flips toward yellow.
  

Magic Dust

• 77.001 Violet Old Copper - nah, this is definitely a purple to blue shift and it's really quite good doing multiple flips the further away from 0 degrees you get.  Nice.
  
  
• 77.006 Gold Pale Blue - this was way too subtle for me.  It's a greeny gold to begin with and it pretty much stays there.
  
  
• 77.007 Pearl Violet - Purple to a dark grey.
  
  
• 77.011 Old Silver Pale Violet - Another super subtle shift which just goes black to my eyes.  I will chalk this up to a faile in application even though this was the most successful swatch of the three.
  
  
• 77.012 Silver Pink - Is it? just looks Greeney Purple to me.
  
  
• 77.015 Gold Yellow Burnt Orange - Green to a very nice Gold.  Just pipped into second place by 001.  I used this on the cockpit glass of my Swordfish II model and it looks great even if it has a propensity for spiderwebbing.
  

Space Dust

• 77.003 Orange Violet - This is the colour I chose to use on B'lakor's wings and over a curved surface it works quite well.  However, this doesn't cover great and will need multiple coats to get a really pronounced effect.
  
  
• 77.004 Electric Blue Intense Violet - Blue to a sort of purple, just not as successful as 001.
  
  
• 77.005 Green Blue Velvet - I think I might have messed this one up, I'm not getting an effect at all but it is a really nice metallic green.
  
  
• 77.013 Bright Gold Brown - Very subtle but a transition from green to an orangey brown is there.  Perhaps on a larger curved surface this will work quite well
  
  
• 77.014 Old Gold Grey Violet -  I'm just not getting the gold here.  It's another green to purple transition.
  
  
• 77.016 Red Gold - this is definitely a green to gold transition but it is green for a long time..
  

To Gloss or Not to Gloss, That is THE Question. 

I have to say I can't see any difference myself.  However, airbrushing the paint onto a gloss surface made a huge difference when you are actually spraying.  The gloss is a barrier and makes the paint much more likely to pool or to spiderweb.  There is a lot of acrylic medium in the mix which is what suspends the metallic particles, but this takes an age to dry and if you are like me patience is something I have yet to learn...

Overall Opinion

There are a lot of colours which basically look green.  I imagine that there is some perfectly reasonable physics paper which explains how the light refraction effect works.  I will continue to use them and these swatches are going to help a lot in the choices I make.  However, it really does depend on the miniature you are painting and the exact curves on the model to achieve the best results.  

Space marines or any character wearing pauldrons or other similarly curved armour pieces is going to look great using shifters.  Large Armoured Fighting Vehicles (AFVs) with flat panels I'm guessing less so, but I am intrigued to see what it looks like on a windscreen of a car.

Jessie's Prints - Episode 33 - The Girl with the Robot Hand

This week, I are mostly been printing... A girl riding a robot hand!!

Trix Robot Rider - Cults 3D 

I found this on EthanTSavage's Cults 3D page and thought it was an awesome sculpt.

The aesthetic is undeniably Anime, and for me is reminiscent of the fabulous Tank Girl comic of the 80s.  Whilst the movie ranks as one of the worst in history, I am a big fan.

I love Giant Robot anime, my favourite being Giant Robo: The Day the Earth Stood Still.  If you haven't watched it you should it's just the right shade of bonkers to make a strange sort of sense and is a blend of diesel punk / magical superhero anime which is incredibly rare.

This was a very quick model to make taking me only a few days to complete.  I used a skull base which I had originally intended for my huge demon model and slathered on the old poundland polyfilla to form a crust over the skulls. 

This is my homage to the famous scene in Terminator 2 where the T800s are walking across the field of human remains crushing skulls underfoot.

Jessie's Prints - Episode 31 - The Ultimate Radical Centrist Demon Dude

This week, I are mostly been printing... A bloody great big Demon Bloke!!

Before anyone asks, my opinion on the Warhammer 40K and Games Workshop IP issue is, that I don't believe in direct recasts of currently available models. However, if you can sculpt something that is an homage to an existing IP or if the original miniature is out of production then I say it's fair game.  Imitation is the sincerest form of flattery after all.

The Ultimate Radical Centrist - Cults 3D

I can't remember how I managed to find this model but I'm bloody glad I did.  I don't play WH40K or typically use many demons in my own RPGs, but this was a love at first sight sort of thing.

Printing the body parts on my relatively small Photon Mono X was easy.  However, his wings were a challenge and I had to once again turn to meshmixer in order to slice them in half and even then they only just fit onto the print bed.  Even though the flat mating surfaces were printed flat on the build plate a good deal of sanding was required to join them together.  the discrepencies were filled with milliput original to make them seamless and whole again.

I wanted the wings to be detachable for transport and so I pinned them with coathanger wire.  Unfortunately they were so heavy and unbalanced that one pin made them rotate so a second finer pin was added.  If I were to do this again I would seriously consider adding some mini magnets.

The included base was insufficient for this quite top heavy model and so I printed a circular one on my FDM printer.  A square socket was carved out and the original base epoxied into place.  This was then covered in my go-to basing medium poundland wall filler.

Painting 

Painting was a game of two halves.  The body got the traditional zenithal, airbrush base colours, washes, highlights and dry brushes treatment.  For the wings I wanted something "Draconic" so I primed in black and then a layer of gloss varnish on the outside of the wings.

The outside surface is curves and I managed to stretch an old orange bag (the plastic mesh netting type) and used this as a mask.  This is the same technique that the Kustom car painters use when they paint the roofs of lowriders using lace table cloths.  I decided to go with the orange to violet colour shift paint from the Valleho "Space Dust" set.  

This was a great base but needed a silver highlight at the top edge to pick out the scales.  In hindsight using the gloss layer was a mistake.  It was a nightmare task to pick out the top edges of the colourshift in some parts of the model due to the reflected light 

The inside wings got a more muted leathery treatment with progressively lighter shades of brown through the airbrush and the finger spines were left darker.

Playtime 

Since printing him, he has debuted as the big bad in a game of Dark Heresy RPG at Hobbits Hole Roleplay Club.  I'm sure that he will also make an appearance towering over the streets of Mega City One in a prog in the not too distant future...

Reaper Bones #41 - Human Fighter, Duke Gerard

You wait months and two Reapers come along in quick succession!

Human Fighter, Duke Gerard - Bobby Jackson (SKU 77063)

This is a great mini because it is so purposeful.  Every fantasy game you've ever played has this type of veteran fighter as an NPC.  They're usually the one giving the orders and putting your neck on the line!

Reaper Bones #40 - Pirate with Treasure

It Seems like forever since I painted a Reaper mini (Dec 2021 to be exact).  I've had this one trapped shipwrecked in the painting queue for quite a while.

Pirate with Treasure - Julie Guthrie (SKU 30026)

Another simple and evocative sculpt from Julie Guthrie makes you wonder what this guy's backstory is.  What's in the treasure chest? How good is he with that cutlass? That knife looks like it's got it's own story.

Yoshi Yamamoto - Ex Sumo Wrestler and Foreign Correspondent

In Episode 18 of Jessie's Prints I printed of a couple of models which, as the Spice girls once sang...

Two Become One

This is a head swap of a sumo wrestler onto the King Pin's body.  A perfect marriage IMHO for my next Cthulhu character.  Hai!!

This was another exercise in using the Army Painter Speedpaint over a zenithal highlight.  The suit about 4 layers of Gravelord Grey and the flesh tones are Crusader Skin with my usual blend of Army Painter Tanned Flesh and Vallejo White.  Black accents are Scalecolour Black.  The base is Speed Paint Hardened Leather with a light dry brush of a couple of other Army Painter browns.

Helter Skelter - To Paint or Not to Paint

In an earlier article about Judge Dredd Boardgames, I hinted that I had prayed to the eBay Gods to send me a copy of Judge Dredd: Helter Skelter.  

 Well the Gods answered and now it is in my boardgame collection.

20 Plastic Miniatures in Need of Some Colour

So should I do it? Should I paint these up?  Tell me in the comments box below.

Reaper Bones #39 - Human Barbarian, Goldar

By Crom this guy has an interesting pose.  It's screaming "Come and have a go if you think you're hard enuff!!"

Human Barbarian, Goldar - Matt Gubser (SKU 77047)

My first Matt Gubser miniature and looking back at his back catalogue in the Reaper Figure Finder, I can see some great sculpts.  Matt has since turned his attention to flexing his comedic muscles in stand up comedy, but there is nothing funny about Goldar.

Human Barbarian, Goldar (SKU 77047)

Bones Progress

Reaper Bones #38 - Harpy

Another Mythical Monster chalked off the list, this time it's a Harpy

Harpy - Julie Guthrie (SKU 77041)

Harpy by Julie Guthrie

Julie Guthrie does it again with another wicked sculpt.  The last time I painted a Harpy was 30+ years ago when I painted the one from the Citadel C18 Night Horrors line.  Judging from the mini I believe this might have been sculpted by Aly or Trish Morrison.

Citadel C18 Harpy

You can tell that things have moved on both technically and aestetically in the last 30 years.  This is a much more interesting less cartoony sculpt and doesn't have the classic overblown features or the flattop haircut.  In particular I love the inclusion of the half demonic wings which give this mini a sense of the evil rather than just being some half human half chicken monster.

Harpy Mythology

Probably the most famous Harpy story is that of King Phineas of Thrace who was granted the gift of prophecy by Zeus until he gave away the Gods secret plan. Zeus blinded him and then left him alone on an island but tormented him with Harpies who would steal all the banquet food the Gods left him.  This is most famously depicted in the movie Jason and the Argonauts (1963) where Phineas is played by the second Doctor Who Patrick Troughton.  

Needless to say Jason fights off the Harpies and saves Phineas who then tells them how to pass through the clashing rocks (Symplegedes) further angering the Gods.

Bones Progress

Reaper Bones #37 - Andre Durand, Time Chaser

Let's face it this is as close to a Hellboy mini that you can get without infringing copyright.

Andre Duran, Time Chaser - Bob Ridolfi (SKU 80005)

As soon as I saw this mini there was only one way it was going to get painted.  Thanks Bob you made my day.

Andre Durand (aka Hellboy)

Bones Progress

Reaper Bones #36 - Anirion, Wood Elf Wizard

Now don't get me wrong I love a mini which is striking some highly dramatic heroic pose, but sometimes you need something that is just a big bag of subtlety.

Like Aragorn when he first meets the hobbits, he is travelling incognito as Strider.  When you are starting out on your path to magical mastery you don't want to be standing out in a crowd attracting attention screaming "look at me I'm a wizard!".  That's where Anirion comes in.

Anirion, Wood Elf Wizard - Bobby Jackson - SKU: 77068

I painted Anirion in shades of grey to accentuate the incognito feel.  only her red hair and blue crystal staff give any hint of colour and I think the combo works well.  My only criticism is that the staff is too thick, it's like she's carrying a small tree.  However, the PVC that the early bones were made in was quite bendy even at this thickness.  Life is a compromise I guess.

Anirion, Wood Elf Wizard (SKU 77068)

Bones Progress

Pulp Hero - Buller the Wonderdog

 A couple of years ago I played a Hollow Earth game set in the 1920's. 

It was a fabulous adventure which leaned heavily on the pulp serial aesthetic of Indiana Jones, Doc Savage Man of Bronze, King of the Rocketmen, Buck Rogers and Flash Gordon to name just a few.

My character was the intrepid adventuring archaeologist Yorkshire Smith who was never more than a few feet from his faithful Bulldog Buller.  A few weeks before the game began I ordered a set of Bob Murch's 28mm Pulp Figures PHP2 Rugged Personalities which contains 4 iconic pulp adventurers (an Indy, a Doc Savage, a pith helmet wearing British explorer, an American pilot and a bulldog.

Yorkie Smith vs The Doom Turtle

Whilst I quickly painted my character I just couldn't find the enrgy or inspiration to paint the dog.  I've never been any good at painting short haired animals like horses or dogs which often have their own pieballed patterns breaking up the solid colours of their body.  These are complex and hard to pull off without making the mini look like it's been painted in some sort of innovative camoflague pattern.

This week I managed to crack it with Buller and finally got round to finishing him.

Buller the Wonderdog

Now if only I could find where I've stored Yorkie I could reunite him with man's best friend.  

"Buller, go find Yorkie!!"

Reaper Bones #35 - Ragnaros, Evil Warrior

The last of my Reaper Bones evil warriors (for a bit), say hello to Ragnaros.

Ragnaros, Evil Warrior - Bobby Jackson (SKU: 77150)

I wasn't terribly enamoured with this sculpt to begin with.  He is basically an acre of plate and scale armour with a couple of skull motifs and a crude shield.  It wasn't until I got stuck in painting him that I decided that the shield was his best feature.

I painted it like dragon scale.  Ragnaros is so hard that after besting a huge red dragon he peeled off the side of it's face and stuck it on his shield (teeth included).  

Totally ridiculous, but then aren't the best fantasy bad guys totally ridiculous? I'm looking at you Damodar!!

Ragnaros, Evil Warrior (SKU 77150)

Bones Progress

Reaper Bones #34 - Mangu Timur

Big dudes wearing plate are the stock in trade of epic fantasy tabletop Role Playing Games.

Mangu Timur - Bobby Jackson (SKU 77148) 

Mangu's got a big shield which gave me the opportunity to paint some planks.  He's also wearing some weird elven looking decorative hip guard over the top of his faulds (the little skirt which does all the hip and butt protecting).  I painted this antique gold but then felt that the viewers eye was drawn to the crotch area so gilded his pauldrons as well.  

Mangu Timur - Front

 

Mangu Timur - Back

Bones Progress

Reaper Bones #33 - Norgol, Irongrave Knight

Seems like we have found a new furrow to plough.  Badass fighter dudes.

Norgol Irongrave Knight - Bobby Jackson (SKU 77065)

Another archetypal evil head henchman.  Full plate, big axe, horns and skull motif.  He's all show but probably goes quite a bit too.

I'm treating you to two photos today (front and back) because I'm pretty pleased with how the cloak came out.

Norgol, Irongrave Knight (SKU 77065) - front

Norgol, Irongrave Knight (SKU 77065) - back

 Bones Progress

Reaper Bones #32 - Kord The Destroyer

Wow!, what an amazing pose for miniature monday.

Kord The Destroyer - Bobby Jackson (SKU 77061)

SKU 77061 - Kord The Destroyer

There's not really much to say that Bobby Jackson's sculpt doesn't already capture perfectly.  Muscles upon muscles, a skyrim inspired horned helmet, furs, a wolfs head, dual wielding a sword and a great axe.  

If he got in a fight with Conan, "By Crom!" I don't know who would come out on top?

Bones Progress

Reaper Bones #31 - Snake Kin, Medusa and a 6 Armed Snake Lady

More scaley monstrosities on Miniature Monday.

I confess, when painting my lizardmen last week I had the green pot of paint open and I just went for it.  The added bonus is that my lizardmen have at least two bad guys that they could be working for.

From left to right we have:

Vandorendra, Snakeman Warrior and Medusa

Vandorendra, Snake Demon (SKU 77117) - Julie Guthrie

Julie Guthrie knocks it out of the park again with theis crazy looking sculpt which will fit right into my Al-Quadim campaigns.  A truly frightening six bladed whirling dervish of a boss monster which looks like it just jumped out of Ray Harryhausen's sketchbook.

In Forgotten Realms these are also known as the Marilith, Type V demons who are apparently master tacticians to the Abyssal Hordes (which is nice) so all you D&Ders have a ready to use stat block thanks to the the D&D Wiki.  Apparently they made their first appearance back in 1e so they have been a feature of Dungeons & Dragons for as long as I have been a player and I have never encountered one.  A situation I must remedy immediately. 

Snakeman Warrior (SKU 77153) - Julie Guthrie

The thing that has always puzzled me about snakemen is how do they move around.  I mean they don't have the body length to form the S shape typically associated with snake locomotion.  Never mind this guy comes with two really big swords meaning he can still reach you. 

Medusa (SKU 77037) - Bobby Jackson

Of course no mythical fantasy monster collector would be seen dead without at least one medusa in their miniature collection.  Bobby Jackson nails it with this sculpt which is only made better by me stringing that naked bow with a bit of sewing thread and superglue.

Bones Progress