Jessie's Prints - Episode 47 - Nimbus the Goliath

This week, I are mostly been printing... A Nimbus!!

A birthday print for my clubmate Paul.  Sculpted using the heroforge app and then downloaded as an STL

The Heroforge Design

Paul got very creative using the heroforge and came up with this design.  The challenge for me was to try to print and then paint him without turning him another famous grey haired blue skinned chap... Papa Smurf.

It is also refreshing to have a render to paint from, relieving me from the complex task of designing a colour scheme.

Words of advice from a 3D Printing perspective

Whilst I love that heroforge exists there is a temptation for the wannabe designer to cram every facet of the mini with detail.  From a printer's perspective this is a bad thing.  Everything is possible when you have a $20,000 Selective Laser Sintering machine and you are making minis out of exotic materials like metal or resin powder.

However, when you are commissioning a print for an SLA printer you really need to consider how the model is going to be printed.  Typically this is going to be at 45 degrees on it's back as no one wants to be dealing with support material all over a character's face.

If you have sheathed swords or capes try to keep them close to the body so that they are supported rather than dangling in free space.  Don't go for the Michael Jackson pose where his cape is streaming out behind him in the wind as this will cause your printer do pull their hair out as they try to find somewhere to support the mini.  

Large volumes of cloth streaming out from behind a mini also mean that they have what I like to call a high "snapping moment" this is where there is a lot of resin supported only by one small section.  One false move or indelicate pick up and "click" there goes your cape leaving you to pray to the Glue Gods that it can be stuck back on again.

Merged Accessories and Paper Dolls

The other main gripe I have with Heroforge is that it is easy to model things that blend into one another.  For example, in the case of our boy Nimbus, his cape sprouts out of his pauldron and it is very difficult to tell where one piece starts and another ends.  

A real sculptor would understand that it would sit over top or underneath, a human form of collision detection, and appropriate sculpting would take place to remedy the situation.  Sadly this does not happen with Heroforge and there is no priority system in the software which detects these edge collisions and does something about it.  

It is effectively the digital version of the vintage Paper Doll toy.

Chub Pearson and Denizen MIniatures

Today I learned that Chub Pearson of Denizen Miniatures passed away in January 2024.

I only ever met Chub when I was buying minis from him at various shows in the 80s and 90s like SALUTE and SELWG.  However, I was always a huge fan of his sculpts and his adherence to true 25mm scale when everyone else's minis were getting larger and larger.

Chub was also one of the first to sculpt some manga characters before we even knew what anime and manga even was.  With sculpts like these it was no wonder they made an indelible impression on me.

To show my appreciation here are a couple from my collection.

These two babes are one of the Cat Girl Twins (SF71) and Female Space Adventurer (SF29).

RIP Chub Pearson.

Doppel - Are we ready for Digital Miniatures?

My social feeds have been bombarded recently by ads for this hi-tech alternative to a piece of plastic.

Doppel Digital Miniature

No idea on the price for this as it looks like a kickstarter type of deal.

I know this is not aimed at me as I'm not the type of gamer who needs this kind of distraction in their life, but I see a few issues with this.

1. It's yet another gadget that will require updating and making sure that you have a compatible device so you can have the app to control it.  How long before the manufacturer goes belly up and your digital mini quite literally becomes a brick?  How long before the app ceases to be compatible with your new mobile OS.

2. Price, I can't see this selling for less than £100 which is about 100 times what I would pay for a miniature these days.

3. Resin 3D printers are fast approaching this price point and among my gaming circle of 30 their are at least 5 of us who have one or more printers which means we print out minis for our mates.  Even if you don't have a 3D printer custom 3D printed miniatures from the likes of HeroForge et all are all the rage among the non-crafty members of my gaming club Dragonskeep.co.uk.

4. Online Play - With online becoming more of a thing every day, these doppel minis are superfluous.  We will need to see what happens with D&D 2024 (The one, or whatever they are calling it these days).  I suspect there will be an outcry when players can't upload their D&D Beyond character into their Doppel box or they have to pay extra for a compatible download.

5. Sounds, really are we taking all the human interraction out of the game at this stage.

6. Tactile play, there is a lot to be said about movingthe little fellows around on the board and how much it ads to the sense of immersion when you are playing the game.  When I DM a game and I have to break sessions across a combat, I often take photos of where the PCs and bad guys are on the map.  If all my players had doppel minis I wouldn't have a clue who is who.

7. Shelf appeal.  No little white box is going to look great on my minis shelf at home no matter how you tart it up.

Still it wouldn't be the RPG Hobby if someone wasn't trying to sell the latest greatest accessory you never realised you couldn't live without...

Jessie's Prints - Episode 36 - Itsy Bitsy Drop Pods

This week, I are mostly been printing... Teeny Tiny Drop Pods!!

Isn't it just the way you wait ages for a commissioned print and two come along at once.  This time it's my work chum Gary who needed some drop pods for an upcoming game of Adeptus Epicus or something like that.  You know the one, the latest hotness from Games Workshop.

StarPorts - P.O.D. (Print on Demand) Droplets - Cults 3D

I don't really have much to say about these other than I managed to get 5 Dreadnought sized pods on one build plate and eight of the smaller unit sized pods on a second.  Print time was about an hour and a half each.

The models came well supported but the packaging of the files was a bit weird.  Extracting the zip file dumped 3 folders on my desktop; a Lychee scenes folder, a supported STLs and an Unsupported STLs.  I was not expecting this and so I thought that the zip file hadn't actually unzipped.  Weird.

I always opt for supported files and as I was leaving these on the support rafts for Gary to get the full experience of removing supports 😂 I didn't bother to check if these were hollow or not.  I assumed that they were solid.  To my surprise, and as you can see in the image above, these were actually hollow which explains why they came out of the wash & cure station a little sticky.  They had actually trapped a huge amount of resin in the hollowed out sections as it effectively formed a cup with nowhere for that resin to drain out of because they print upside down.

If I were printing again I would add my own supports and orientate them so that the unused resin can drain away whilst still being attached to the build plate.  A minor gripe I know but sometimes these things matter.

Anyway, as you can see these are considerably smaller than the full size drop pod for WH40K.  Aint they cute 😃

Can You buy Good Hobby Products from Wish.com in 2024?

Earlier this month I blogged about my experience buying hobby products from AliExpress in 2024, this time I turn my attention to Wish.com.

104pcs Simulation Static Grass Tufts Model Mini Grass Cluster - £4.06

My basing game has been pretty weak of late.  Trix Robot Rider needed some desert vegetation to add a little va va voom so I chose these mini grass tufts.  Herein lies the problem when you are buying stuff from Wish, you are entirely reliant on the chinglish descriptions that the vendors provide.  They often list multiple pack sizes or products in the same listing and sometimes it's hard to know what you are buying.  

The upside is of course at these stupidly low prices you can often order multiple different options all for less than the price if you were to go to a big box retailer like Hobby Craft.  If you want to try out a hobby product for not much outlay the online vendors on Wish.com are a fairly safe way to do it.

These tufts are quite small and measure 5mm in diameter.  This might be what the number 5 on the box refers to.  In their defence it does say mini... 

I added a few of them to Trix's base and I really think that they add a certain something.  

Perhaps on a smaller miniature base they would have much more impact.  I will try to buy some bigger ones in future. 

50pcs DIY Craft Party Alligator Clamp Wire Clip - £3.74 - 3/5

I had seen GroundAffected suspend his resin parts for priming on these alligator clips so I bought a bag of 50.  To be honest the clips are not really strong enough to safely hold larger parts but for small 32mm miniatures they are going to be a godsend. 

There are obviously 2 parts to any painting jig, the thing that attaches to the bit you are painting and the thing that that thing attaches to, lets call it a base.  Having a sturdy base is just as important  

Clearly I am going to have to design and print some sort of hobby clip base or print out something like this Alligator Clip Stand by retro-stingray.

If I were buying again I would opt for longer wires as I think the ones I bought were mainly designed as table card holders.

60g Six Colour Flock Adhesive Nylon Static Grass Powder - £2.51

Wow this is great value considering a similarly sized bag of grass from a well known retailer is 3 times the price and only comes in one colour.  I now need to build a static grass applicator like Luke Towan  

UV Resin - 50g UV Resin Ultraviolet Curing Epoxy Resin Crystal Clear - £1.28 5/5

I have wanted to try out some of this clear UV resin for a while.  I have a large bottle of the stuff for my 3D printer but it doesn't set quickly enough when making things like pools of lava or green ooze.  This little bottle was cheap enough that I don't care if it works that well.

I am glad to report that it works really well, just 5-10 seconds under my pretty weakass UV torch and it sets rock hard.  I have a big lava base project in the works and this will be just the ticket for greating that glossy flowing lava.

A DIY Funny Wooden Sailing Boat Model Kit 1/50 Scale Ship £5.42 - 0/5

I would love to say that this is an amazing model and a fun way to spend a Sunday afternoon, but I can't.  Sadly the vendor cancelled the order unilaterally.  This happens from time to time on Wish.com, often when the price is too good to be true.  

I've seen this kit on AliExpress so maybe I'll try another order... ooh a stirling steam engine!

Jessie's Prints - Episode 34 - Teenage Mutant Sorceror Tortle

This week, I are mostly been printing... A Tortle!!

Epics N Stuff Tortle Sorceror - MyMiniFactory - 109539  

This week saw us return to The Rivenlands D&D Campaign at Dragons Keep Roleplay Club.  My clubmate and fellow founder Paul needed a mini to represent his Tortle Sorceror so he commissioned me to print and paint a supplied STL. 

He's a chunky boy and basically pyramidal in shape.  The mini came both pre-supported and unsupported, as is common these days.  However, he also came as a pair of pre-hollowed out variants for those wishing to not waste resin or just wanting a slightly lighter mini.  

This is the first time I've seen this done on a 35mm single piece character mini, so I printed a hollow one for shits and giggles.  The only issue I had is that the wall thickness just wasn't thick enough to prevent the odd hole appearing when I removed the supports. 

Painting

The customary zenithal priming was done and mounted to my base of choice (a two pence piece).  I said he was chunky and barely any base was visible under his girthy feet.

Paul supplied me with a photo of a make by Empire of Minis so I didn't even have to make any colour choice decisions. 

Base colours were a mix of Vallejo Acrylics, with midtones dry brushed on before picking out the highlights.

Serious Skin Problems

I really struggled with the skin on this model, in fact it was practically the last thing that got painted.  The sculpt had no texture and yet he is supposed to be a tortoise like humanoid.  Last time I looked they had pretty scaly lizard like skin and his was as smooth as a baby's bottom.  I have a small collection of greens and they were covering really horribly over the zenithal, particularly where areas of shadow were converned.

 

I persevered though and resorted to mixing in a bit of some Crafter's Choice acrylic that I found in a Wallington "Arkwrights" shop.  

G.. G.. G.. Granville! Fetch me that tube of G... G.. G... Green Paint!

This stuff is so random it doesn't even have a paint name, just a number (PNTA-134) but it's made by Royal & Langnickel and it did the job where my specialist miniature paints could not.  

 

This just goes to show that when you are painting don't just dismiss your art materials because they aren't Vallejo or Games Workshop.  Try out lots of different paints and you just might hit on some secret sauce.

Jessie's Prints - Episode 33 - The Girl with the Robot Hand

This week, I are mostly been printing... A girl riding a robot hand!!

Trix Robot Rider - Cults 3D 

I found this on EthanTSavage's Cults 3D page and thought it was an awesome sculpt.

The aesthetic is undeniably Anime, and for me is reminiscent of the fabulous Tank Girl comic of the 80s.  Whilst the movie ranks as one of the worst in history, I am a big fan.

I love Giant Robot anime, my favourite being Giant Robo: The Day the Earth Stood Still.  If you haven't watched it you should it's just the right shade of bonkers to make a strange sort of sense and is a blend of diesel punk / magical superhero anime which is incredibly rare.

This was a very quick model to make taking me only a few days to complete.  I used a skull base which I had originally intended for my huge demon model and slathered on the old poundland polyfilla to form a crust over the skulls. 

This is my homage to the famous scene in Terminator 2 where the T800s are walking across the field of human remains crushing skulls underfoot.

Jessie's Prints - Episode 32 - Cowboy Bebop Spike Spiegel Swordfish II

This week, I are mostly been printing... The Swordfish II

Cowboy Bebop Swordfish II - Thingiverse: Thing 3082811

Anime fans will instantly recognise Spike Spiegel's red starfighter the Swordfish II.

This is an older file designed for FDM printing and is therefore a abit on the low-poly end of the spectrum  but it is very well put together all the same.

Meet the Parts

I opted to print this on my Resin SLA printer and I was mindful of the large size of the model.  The main core of the ship needed to be split in two using meshmixer and I took the opportunity to learn how to use the hollow functions. 

I couldn't believe how easy this was and it's definitely something I will be using in the future when I make larger objects as I reckon it saved a metric ton of resin and didn't lead to those peeling and splitting issues I experienced when printing my 3D Printed Akira - Kaneda Bike.

Sub Assembly

Once I had worked out what parts I needed and got them all printed to my satisfaction, I began gluing up the sub assemblies.

The core body and nose were split in meshmixer so needed to be joined back together.  Despite a really good print whenever I use mesh mixer I need to putty the seams.  The hollowed out core and nose also needed the drain holes filled and sanded.  I then doubled pinned the wings to this main assembly.  In hindsight I should have spent more time on this as there was a little bit of an alignment issue between the wing root and the wing itself.

The back half of the model was an utter nightmare of badly fitting airfoils and I bodged as best I could.

The cannon barrel, cockpit and reversing gear were painted using various colour shift paints and left until final assembly   

This was all given a solid black primer with my go-to rattle can matt black car paint from Poundland.

Panel Scribing and Underpainting

I knew I was going to want to try out the underpainting technique I've seen a lot of AFV modellers use to create their panel lines, but this model didn't really have any.  I dug out a ruler and scribed the aileron's and the folding wing joins with the back of an x-acto blade.  The rivet detail was simply drilled with a pin vice and a few other panel lines added.  This was all recoated in black ready for underpainting.

I used a Daler Rowney FW artists white ink straight out of the bottle through the airbrush.  I'm a pretty novice airbrusher and I have always struggled with thinning and getting the right consistency of paint and prerssure to prevent spidering.  

However, this ink added the new complication of fisheyes.  I'm not sure if it is the ink or the undercoat, but it was a real pain.  Several coats went on and some had to be wiped off.  I persevered and finally it was time to add the red coat. 

Weathering and Paint Chipping

The Swordfish is an old ship and given the meagre budget that the crew of the Bebop operate with, there is only the money to do basic maintenance.  A scuffed up worn out appearance was a must.

I use the sponge chipping method lightly dabbing some black on all the leading edges that would take the most punishment on re-entry.  This was then highlighted with some bright silver from Army Painter.

A simple but effective method to weathering whilst maintaining a clean look and not taking an age to dry.

Spike Spiegel - MyMinifactory

No model of the Swordfish II would be complete without it's pilot and the main hero of the show, Spike Spiegel.

I found a lovely model of Spike on MyMiniFactory which was a breeze to print and paint.  I think it makes a great addition to the model.  Shout out to sculptor EthanTSavage whose work is prertty amazing and scales up really nicely. 

The Base

I considered lighting this model but to be honest it was a bit of a pain once assembled.  I had a plan for routing the LEDs to the engine and the two spotlights on the nose, but I was not confident that the effect would be worth it given the low-poly detail of this model.  

I did want a modern looking base and found the perfect match in a box style frame in a thrift store.  Removing the glass and gluing the mdf backer in place proved a sturdy enough platform for a coathanger to be glued in place supported by a generous volcano of milliput on the underside.

I also took the liberty of drilling an extra hole in the corner for Spike to be glued in place.

The Swordfish II Plaque - Thingiverse: Thing 6455107

One of the more iconic graphical elements to the show is the logo.  I love the big kanji script but wanted the center to bear the name of the ship.  I found a suitable image online and modified it with GIMP.  I then converted the JPG to an SVG using Convertio and imported this into Tinkercad.  I added a simple solid back to the object and exported as an STL.  

From start to finish this took no more than 10 minutes.  You can download the STL file for free using the Thingiverse link above.

Many Thanks to...

A big shout out to Lou Dalmaso aka Aztek Dummy on YouTube.  I've thoroughly enjoyed his forays into 3D printed models and it was his channel that inspired me to give it a go myself.  

Big thanks also to the rest of the Youtube modelmaking community for giving me hours of enjoyable content over the years. Plasmo, Mr E Models, SpruVerse, World of Wayne, TrekWorks, Interstellar Modeler, Boylei Hobby Time, Luke Towan, MSPaints, Squidmar, Ground Affected, Midwinter Minis and so many more...

Jessie's Prints - Episode 31 - The Ultimate Radical Centrist Demon Dude

This week, I are mostly been printing... A bloody great big Demon Bloke!!

Before anyone asks, my opinion on the Warhammer 40K and Games Workshop IP issue is, that I don't believe in direct recasts of currently available models. However, if you can sculpt something that is an homage to an existing IP or if the original miniature is out of production then I say it's fair game.  Imitation is the sincerest form of flattery after all.

The Ultimate Radical Centrist - Cults 3D

I can't remember how I managed to find this model but I'm bloody glad I did.  I don't play WH40K or typically use many demons in my own RPGs, but this was a love at first sight sort of thing.

Printing the body parts on my relatively small Photon Mono X was easy.  However, his wings were a challenge and I had to once again turn to meshmixer in order to slice them in half and even then they only just fit onto the print bed.  Even though the flat mating surfaces were printed flat on the build plate a good deal of sanding was required to join them together.  the discrepencies were filled with milliput original to make them seamless and whole again.

I wanted the wings to be detachable for transport and so I pinned them with coathanger wire.  Unfortunately they were so heavy and unbalanced that one pin made them rotate so a second finer pin was added.  If I were to do this again I would seriously consider adding some mini magnets.

The included base was insufficient for this quite top heavy model and so I printed a circular one on my FDM printer.  A square socket was carved out and the original base epoxied into place.  This was then covered in my go-to basing medium poundland wall filler.

Painting 

Painting was a game of two halves.  The body got the traditional zenithal, airbrush base colours, washes, highlights and dry brushes treatment.  For the wings I wanted something "Draconic" so I primed in black and then a layer of gloss varnish on the outside of the wings.

The outside surface is curves and I managed to stretch an old orange bag (the plastic mesh netting type) and used this as a mask.  This is the same technique that the Kustom car painters use when they paint the roofs of lowriders using lace table cloths.  I decided to go with the orange to violet colour shift paint from the Valleho "Space Dust" set.  

This was a great base but needed a silver highlight at the top edge to pick out the scales.  In hindsight using the gloss layer was a mistake.  It was a nightmare task to pick out the top edges of the colourshift in some parts of the model due to the reflected light 

The inside wings got a more muted leathery treatment with progressively lighter shades of brown through the airbrush and the finger spines were left darker.

Playtime 

Since printing him, he has debuted as the big bad in a game of Dark Heresy RPG at Hobbits Hole Roleplay Club.  I'm sure that he will also make an appearance towering over the streets of Mega City One in a prog in the not too distant future...

Jessie's Prints - Episode 30 - Mr.Blobby

This week, I are mostly been printing...  Blobby Blobby Blobby

Mr Blobby - Digital Taxidermy

As soon as I saw this model I had to have it.  For those of a certain age growing up in the UK our childhoods were indellibly etched with the presence of Mr Blobby.  Spawned by a creative monster he graced (or rather bumbled) onto Noel Edmond's House Party on Saturday evenings circa 1996.  This was a time before streaming and there wasn't even channel 5!!  Options were limited and most people flocked to the most popular variety program of the day.  

Sadly Blobby could not be contained in just a 1 hour TV slot and soon there were comic books cartoons a pop song and Blobby took over the UK.  Of course this stratospheric rise to fame took its toll and overexposure led to a meteoric collapse in Blobby's popularity.  

Needless to say this makes him ripe for a Judge Dredd appearance.  I imagine that the residents of the Noel Edmond's Annex of Thatcher Block (Sector 55) are itching for a House Party with those Smurfs from the Jean Claude Van Damme block.

These are multipart minis with lots of options for arms and weapons.  I printed some test pieces at 15mm and realised that I was going to have a hella fiddly time gluing individual arms on the blobby bodies.  I resorted to loading the files up into meshmixer and created 10 different poses which I could then print en masse at 15mm scale.  Meshmixer For The Win!! 

Zorg Industries Wall Art - Thingiverse:4815231 

To further embellish my Mega City One Miniature Storage Block I thought I would add a couple of signs which can be magnetically attached to the side or top of the case.  This wall art was perfect when scaled down for miniature use.

Mulder & Scully - Maco3D

A commissioned print for my Dragon's Keep Roleplay Club chum Kat.  We are currently playing in a Delta Green (Cthulhu meets the X-Files) game as special agents and being the world's biggest Gillian Anderson fan there was only going to be one FBI agent she wanted to play.  

I was a little dissapointed that these models came as rar files and when opened I could see that they were designed in a statuette scale for multipart printing.  They are both very nicely sculpted and I managed to support the files easily enough.  Mulder also came as a one piece print and Scully came as a two part print with options for skirt or trousers which was also very nice.  I would have preferred a complete model in both skirted and trousered versions making it easier for 28mm printing but this is a minor gripe.

However, the biggest problem with scaling statuesque prints down for tabletop games is that they are anthropomorphically correct.  This means that they have spindly ankles, wrists and gun barrels which snap off at the slightest glance.  To try to combat this I made them 5% bigger in the X and Y dimension in the hope of fattening and strengthening them up.   

As you can see they don't look at all overweight.

Jessie's Prints - Episode 29 - Killdozer - Goes Anywhere Kills Everything

 

This week, I are mostly been printing...  THE KILLDOZER

Killdozer / Landraider - Thingiverse: 734066

The quintissential Cursed Earth chariot and a must print for my 15mm Judge Dredd RPG games.  This multi-part model is an excellent sculpt but originally intended for FDM printing.  I scaled it down by 50% to fit perfectly my 15mm Lawmen.

Those of you familiar with the history of this iconic comic car will know that it was part of the Matchbox Adventure 2000 range and came in Avocado Green (1977-79) or Metallic Blue (1980-81),  Neither of these colours befit the Justice Department of my youth and so I went for a Dark Blue with Yellow and Red accents.

I don't know what it is about airbrushing blue but I just don't seem to be able to find the right blue.  I did get to try out some of my colour shifting space paints from vallejo on the turbine and exhaust which was nice.  I think I need to airbrush an entire vehicle to get a really good idea of how they might work.

Justice Department insignia greeblies were sculpted in milliput and the windows got the classic Car Wars wasteland reflection treatment.  You can find my poster art in my Judge Dredd mini posters collection 

Jessie's Prints - Episode 28 - Mega City One Street Furniture

This week, I are mostly been printing...  Street Furniture

Suicide Booth - Thingiverse: 734066

I'm a big fan of Futurama and there was no way I was going to pass up the opportunity to print off a few suicide booths for the citizens of Sector 55.  The model is very accurate but scaled far too large for my printer and so needed to shrink it to about 1% it's original size.  The model is also hollow and at my 15mm scale the walls became impossibly thin for my resin printer to print consistently.  

However, I did get a couple of decent prints which painted up nicely.  I also created some posters of the signage which I've included in my Judge Dredd Mini-Posters pack. 

Robot Food Stand - Thingiverse: 1645528

This is a great little model for designed for 28mm miniature wargaming game infinity but I thought it was such an interesting shape that it would make a great centrepiece for any plaza scene.

Printing in 15mm scale was easy enough although the robot arm is incredibly fiddly.  I chose to magnetise the roof of my stand to make painting and assembly easier which was a challenge at this scale.  The robot arm is a little too big for this model so I had it leaning out in "attract mode".

In my games this is going to be Klaw Dogs, their moto is "Served Robot Fresh" and you can download this signage in the Judge Dredd Mini Posters Pack.

Tardis - Thingiverse: 153977

I have always wanted my own tardis for a Judge Dredd game.  Not necessarily as a plot point but as a piece of background scenery.  I'm sure that if any of my Judges are out on patrol they will spot this immediately and either blow it up or have it taken away as an illegal structure without the correct city permits.

Needles to say, if Judges ever encounter a timelord, they should arrest them on sight as an illegal alien.  I believe that possession of a timetravel device also carries a significant sentence these days.

Holding Post -  Thingiverse: 6023582 

Having GM'd a few games now, the one functional (storywise) piece of street furniture I've always needed are holding posts.  These are the ubiquitious plascrete features that adorn the streets of Mega City One to which Judges cuff their arrested perps to await pickup from a pat-wagon. They are tough, tamperproof constructions designed to stay intact in all but the most extreme conditions.  They are able to withstand most vehicle impacts and abuse from smallarms or handheld tools making them the perfect safe and sturdy way to keep your perps locked up.

The holding post is my own design for my 15mm Judge Dredd miniatures but can easily be scaled up for 28mm games.  It makes a great addition as an objective marker or cover for games such as Warhammer 40K, Cyberpunk or infinity and is available for free download  at the link above.

Sci-Fi Benches - Thingiverse: 4293393

A rare model are this collection of benches designed specifically for Warlord Games Judge Dredd Miniatures wargame.  A great job on the model from Death Zap Studios who has also done some fantastic work on scenery and buildings for the Marvel Crisis Protocol boardgame.

Sci-Fi Merchant Stall v3 - Thingiverse: 5924557

This model is a fabulous set piece designed to complement any wasteland or outer rim world but I think it looks great in a Mega City One pop-up shop sort of fashion.  It's hard to keep track of the changing trends inside the city and these prefab pop-up structures change vendors on a weekly basis much like the tastes of your average citizen.  

I printed out a bunch of these funky little structures for my games.

Savage Dredd - Gangs of Mega City One

Mega City One has its fair share petty criminals and none come more petty than the juve gangs who vie for supremacy in their respective blocks.  Here are just a few of the gangs I have created for my Judge Dredd campaigns set in Sector 55.

The Squid Squad

Residents of Little Korea, the squid squad are easily identifiable by their neon pink all over jumpsuits and black facemasks.  They are one of the most organised and disciplined gangs in Sector 55 and should be approached with caution.  Their suits offer protection against all chemical attacks and their masks include breathers and headsets rendering Stumm Gas and Sonic cannon ineffective.

I found a free guard model on Thingiverse 5021982 and scaled them down to 15mm to match my other Judge Dredd minis.  This was pretty much the limit of how small I can print a standard 28mm mini as they were a little vulnerable in the ankle area.  I love how they came out and with a quick lick of paint they are absolutely ready for a rumble in Mega City One.

The Fatties

It is almost impossible to find models of fat people on the internet.  Of course the officially licenced range has some fantastic minis but these are 35mm.  Milliput to the rescue.  I blobbed on some putty and roughly sculpted some corpulent citizens to flesh out any gathering.  I only made 5 but if I get a really great scenario idea that needs more then who knows. 

There is a distinct lack of protest banners as whenever they are depicted in the comics they always seem to be shouting about something or other.  I did have a go at modelling belly wheels but it was an abject failure.  They of course come in a wide variety of jumpsuits and track suits as they are always in training for their next big weigh in.

TV Media Crews

In Mega City One there are almost as many TriD TV channels as there are citizens.  From documentary channels to citizen broadcasters the airwaves are chock full of options for the discerning viewer and 24 Hour News is just one small slice of that media cake.

Looking like a cross between the anchor men of old and corporate shift workers, these guys are a common sight at any incident.  They band together like fleas on a rat, but when they smell a story it's dog eat dog.  Oh and don't think that they aren't above creating the odd incident on a slow news day.

The Barbarellas

These costumed crusaders can usually be found defending their home turf of Jane Fonda Block.  The Barbs, as they are colloquially known, work double duty as an organized crime gang and the block's Citi-Def. 

Armed with stub guns and reflective body armour styled after an old holovid from 1960s.  Membership of this gang is exclusive and you only get in if you are a prime specimen of health and vitality.  One of the gang's most lucrative rackets is running the many Fonda Fitness Centres which also give it access to a steady stream of new recruits in peak physical condition.