Miniatures Monday Goes Old School Saturday

I normally leave my mini posts until Mondays to show off the latest update on my Reaper Bones Painting Marathon progress. 

Well, I thought I'd spice it up and share a few of my other projects which have recently been completed (thanks to a spot of spring cleaning during lockdown).  Normal service will resume next week.

Vintage Citadel "Fiend Factory" Balrog - FF5 C31

An iconic miniature from the Fiend Factory range, this imposing winged demon has been one of those bucket list minis that I've been holding onto for some time.  Finally he has a paintjob worthy of the sculpt and this just makes me want to find more of these vintage "pre slotta" base Citadel minis to paint.

Citadel Fiend Factory Balrog (FF5 C31) - Buy your own

Thrud The Barbarian (LE12)

Readers of vintage White Dwarf will recognise this pin headed barbarian.  Created by illustrator Carl Critchlow he was White Dwarf's long running comic strip from issue #45 to issue #105.

An obvious pastiche of Conan the Barbarian, Thrud was entirely played for laughs and Carl has continued to draw him outside of the pages of White Dwarf in his own Thrud The Barbarian comic.

This is my Thrud's 3rd paintjob only possible due to the chunkiness of the detail (I never bothered to strip him of his previous paintjobs).  I am half tempted to track down the other 4 Special Edition Thrud miniatures Citadel have made over the years.

Citadel Thrud The Barbarian (LE12) - Buy your own

More 15mm Madness for Judge Dredd

Whilst I was tracking down the origins of my Mega City One Citizens, I came across some quite stunning minis from a range of manufacturers which are frankly fuelling my obsession with small scale skirmishes.

HOF Media Team - What good is a Block War without good media coverage?  This 10 pack is perfect for that front-line news media team.  Lets hope they don't stand too close to that fuel truck.  Whoops too late...

HOF69 Draccian Lord and Warriors - Tell me that these aren't Kleggs!

If you are going to have Kleggs then you need to have Klegg Hounds

Splintered Light Komodo Dragons

Passable Klegg Hounds

Khurasan Miniatures - A veritable smorgasbord of different and very useable sci-fi miniatures I have fallen in love with their Marauders who make for a perfect Mega City One juve gang.

Khurasan Miniatures 15mm Sci-Fi Marauders (END100)

Khurasan Miniatures 15mm Sci-Fi Marauders (END101)

Khurasan Miniatures Planet 15 (Cinematic Range)

Cursed Earth Muties or residents of Jed Clampett Block (Redneck1)

I aint fraid of no Ghosts! - (Spirit Punters)

Anyway that's more than enough to be getting on with for now.

The Empire Strikes Back is 40 Today

My Star Wars relationship began with The Empire Strikes Back.



Whilst I am assured that I was taken to see Starwars at the tender age of 4, I don't really have any recollection of the actual trip to the movie.  However, I spent days watching and rewatching a VHS copy of the movie which had been taped from a Yorkshire Television broadcast one christmas, complete with The Two Ronnies advertising the Atari 2600.

The summer holiday highlight that year was going to the cinema in Filey to see the movie.  I had already been primed as a few days earlier I had begged for a copy of the comicbook novel.  I won't go into detail about what a mind blowing experience that was.  Later that year I got a couple of action figures (the only ones I ever owned).

Comic Paperback

Han Solo Hoth

IG-88

2000AD Fan Films - Judge Minty, Strontium Dog and Rogue Trooper

Looks like we are going to have to wait a while for the new Mega City TV Show and the Duncan Jones Rogue Trooper movie.

In the meantime we can sit back, relax and watch the following fan made films:

Judge Minty



Search & Destroy - A Strontium Dog Story



Rogue Trooper: The Quartz Massacre

Jessie's Prints - Episode 7 - A Gloom Card Box and a 3 x 4 Dias

This week, I are mostly been printing...

Gloom Card Box -https://www.thingiverse.com/thing:4377287

If you haven't heard of Gloom it's a very fun little story telling card game with a neat gimmick.  The cards are made of transparent plastic.  The idea is that you stack these cards on top of each other to increase your bonuses and create a winning tableau of cards.  The only issue I have is that it comes in one of those god awful-side-by-side boxes which are no good to man nor beast.  Fortunately there are a few designers on thingiverse who think as I do and have uploaded some alternative boxes.

Domestic 3D printing is still in its infancy and not quite at the Star Trek replicator phase of development.  Sometimes you download a model and ahave to do a bit of work to get it to print satisfactorily.  This was the case when I downloaded MVB01s Gloom Card Box.

If it doesn't fit... don't just quit!!

The model had been designed for a larger print bed than I own, the two parts were aligned on the long axis.  Firing up Sketchup I imported the STL file, exploded the model and reoriented the parts along the short axis.  Export the STL, slice it in Cura and load it into the printer.

It printed fine but was a smidge too small to fit the actual cards and there was no tolerance built in to accommodate the lid and the box sliding together.  They were far too tight to be useable.

I guess you could say that this was my own stupid fault for not checking the dimensions of the print before I commited to 3 hours and a few gramms of plastic.  However, I look upon this failure as an opportunity to upskill and so I went back to the model into Sketchup and redimensioned it to both fit the cards and to have a 1mm tolerance factor.  Second time's a charm as they say.

Now they fit - Download from Thingiverse

I've uploaded this to Thingiverse as a remix of MVB01s original model.


3"x4" Dias - https://www.thingiverse.com/thing:4376794

I am currently painting tiny plastic furniture as part of my Reaper Bones Marathon and one of those pieces is getting the full LED treatment but I need something to hide the battery.  When you have a 3d printer this is no problem, you just knock something together and hey presto a dias, the underside of which has a cavity just big enough to hide a CR2032 coin battery.

3" x 4" Dias - Download from Thingiverse

I've uploaded this to thingiverse so you can print one of yourself.  Just remember to like share and tip the designer a few beans if you like the model.