It's hard to believe that I made my original Judge Dredd H-Wagon over 5 years ago.
With my upcoming Savage Dredd game I thought it was high time I fixed some of the issues with model and gave it a bit of a revamp.
This, as always, is a work in progress and with that intent I have made the build a little bit more modular. I assume that the Justice Department buys these in based on a standard pattern and then adds on whatever gizmos it needs as the circumstances dictate.
The main H-Wagon body is now longer with thrusters underneath and I added a central recess for a magnetised weapon hardpoint such as the included riot foam cannon turret. A sonic cannon is in the works as we speak. The two gunner cupolas are now printed as seperate files with little recesses for them to fit into.
The whole front of the H-Wagon is printed as a separate piece allowing the model to be printed without supports. The entire model has been rescaled to fit my 15mm Judges (aka laserburn lawmen)
I have plans for a different front end to make the H-Wagon even longer with a stylized eagle.
The internet never fails to amaze me and after 15 or so years of writing this blog and essentially shouting into the void...
the void shouted back.
Facebook 15mm Dredd Wargaming Community
As I was doom scrolling through facebook I chanced upon a picture posted by the very talented sculptor Nikki Chatwin of Sprue Goblin Games. Nikki had posted some pics of his latest project 15mm Fatties and authentic looking fatties are one of those minis that I struggle to find.
Nikki is also behind the Megacity 15 Facebook group dedicated to 15mm Judge Dredd wargaming. After reaching out it seems that Nikki had seen some of my posts and played a small part in his obsession with 15mm scale Judge Dredd wargaming, So at least one person reads this blog.
I honestly can't wait for Nikki to finish those fatty sculpts but in the meantime some of her work is available for sale via Ramshackle Games. I love her sulpts so picked myself up some Chaos Judicars and Sector NG15 Civilians.
With my new Judge Dredd campaign slated for October I really need to get a wiggle on writing it and building some interesting terrain pieces for the players to interact with. The objective is to create some lightweight flat packable buildings which can be easily transported to my regular Friday game group at Dragons Keep Roleplay Club.
I was inspired by these nifty Parametric foamcore connectors which I found on Thingiverse, but I wanted something that would work with my material of choice, 2mm ABS board, be very low profile and have a dark gothic style. So I designed these 90 degree, T junction and X Junction connectors.
These are quite small prints so I recommend printing them out on a resin 3D printer, However, being so small you can absolutely fill a build plate and you are pretty much done. I've made a separate file of larger 5mm Foam Core Connectors if you want to make buildings in a larger scale
15mm Flatpack Building Facades - SVG File
I also designed a few building facades as vector files which can be sent to my laser cutter for etching. If you don't have a laser cutter these can be easily knocked up by hand with a sharp knife and a steel ruler. Once I have perfected them I will offer them as a download here.
PROG UPDATE
As with everything I do on this blog it is a work in progress. I spent a morning finishing up the first of the building SVG files (hopefully more to come) and you can download the file for free below:
The continuing escapades of building a model railway which fits on a 60cm floating shelf.
Once the track was laid the urge to play with the layout was strong, but I needed power and control.
As is the Budget Model Railway way this comes in the shape of a PWM (Pulse Width Modulation) motor controller from eBay. I found a bevy of them on AliExpress for a mere £2 each. They come with a potentiometer to control the speed of the loco and a 3 way rocker switch to control the loco's direction (forward - off - back).
Everything is prewired and you just need to screw the wires into the terminal blocks. This is where the fun begins as there were no instructions on whihc wire goes where. The circuit board has some gobledigook on it both in Chinese characters and electronic symbols (which might as well have been Chinese). Fortunately just a brief googleing brings up a photo of a very similar circuit which explains where all the wires go.
Power from a 12v DC phone charger wallwart (or similar) is screwed into the Positive and Negative terminals at the top of the board. The connection to the track is screwed into M1 / M2. The four wires from the rocker switch connect to the terminal block on the left and finally the potentiometer is plugged into the white JST connector. Easy peasy.
First Running
The initial runs on the track were a whole lot of troubleshooting as usual. I wired my track feed to the middle "mainline" which meant I had a dead section of track with the topmost fiddle line when the points were switched to the top siding. This was rectified by adding a second set of power lines. The routing for this is a little bit sketchy and snakes out of the layout and off the front of the shelf. This is most unacceptable for a display layout and I will resolve this later.
Having played with the layout for some hours, I also want to add in a couple of on/off isolating switches, this will mean that if I want to I can isolate a loco on either of the fiddle lines and bring another loco out unimpeded. This will create a go around. Currently the loco can only pick up on the left and move to the right, a second loco which operates from right to left will dramatically improve operational potential and allow me to stage rakes on the fiddle yard.
YouTube Shorts
Around this time I also discovered the joys of unedited YouTube shorts. This has enabled me to make lots of videos of both this layout and my Coffee Table Layout Upper Carrom. Frankly this has been quite addictive and I should probably check myself into the Betty Ford Clinic.
This week I mostly added more lights to the layout. I started up a little production line making the small circuit boards to distribute the power to each of the buildings and soldering in all the streetlights.
I also finished the remodelling of the cobblestone yard in front of Woods Brothers in the South West corner of the layout.
Funky Foam to the Rescue
I had tried a couple of different techniques to get a decent looking cobbled area but finally hit on this top tip.
Once you have created your template of the area you wish to cover with cobblestones, transfer the shape to 1mm cardboard or similar. Glue a sheet of Funky Foam (1mm XPS foam) which you can get in Hobby Craft (12 sheets for £4) and then trim to your card.
Take a pyrograve pen or soldering Iron with a knife blade tip and carve your lines into the foam. This produces pretty good looking cobblestone sets.
After some painting and weathering using the sponging method, I'm really pleased with how they look. Uniform enough but also random enough to pass muster.
As is customary I actually started this blog post at the beginning of May but got massively sidetracked by the 60cm Floating Shelf Layout Challenge. I even made an instructional video on How to Make Cheap and Easy Cobblestones whilst this blog post was languishing in developmental Hell.
Building a Retaining Wall
I then needed to sort out the horrible mess I had made of the curved section of track which forms Loop C, specifically tying this into the layout yet providing necessary seperation between track and cobbled area. This was simply a section of 2mm thick ABS foam Board jammed in the gap and then I ran a pencil atop a wagon to replicate the rise of the track onto the wall.
A strip of foam board makes excellent capstones and this was all painted with a range of browns and greys just like the walls of the Palethorpes Sausage Factory building I made a few weeks ago. The gap between the track and the wall was then filled with my go-to gap filler Poundland Polyfilla although this remains to be painted and foliage added.
Finally I cut half of the branches off one of my chinese plastic tress and clued in to a traingle of foamboard before jamming it in the gap between the long workshop and the derelict warehouse.
Obligatory Running Video
I also received a long awaited depressed center wagon from eBay which now serves as the official Carrom Track Inspection Camera Car for making driver's eye videos. Enjoy...
This weekend saw my Dad and I visiting the Sompting and District Model Railway Exhibition.
This was a fantatic little day out for the pair of us and it is about 35 years since I have last been to a model show of any kind.
If I remember rightly it was the Model Engineers show at Olympia where I got to see the anamatronic ABC Warrior and the Landrover Mega City 1 Taxi which were going to feature in the upcoming Judge Dredd movie with Sylvester Stallone. The team from Robot Wars were also there recruiting robot builders for their new TV Show which was still in the pre-production phase. Yes, it was that long ago.
Sompting Exhibition Layouts
Many thanks to all the members who brought their exhibition layouts and for taking the time to chat with us. Everyone was extremely welcoming and we both had a great time chatting and looking at the wonderful layouts. Big shout out to Mike Potter from Budget Model Railways for publicising the event on his YouTube channel and bringing his Japanese shunting layout which was quite stunning.
Barraton - 00 Scale Layout
A charming scratchbuilt Era 1 locomotive
Thomas The Tank Engine celebrating his 80th Birthday
a 360 degree shunting layout
I could not leave without making a few purchases some of which may find their way onto my own floating shelp layout including:
Arnold 6354 / Rapido (0634) - BAUSTAZ Coaling Station - £6
When I watch my favourite YouTube channels they invariably feature industrial buildings. Sadly I do not have many of these so I grabbed this visually interesting multi-level multi track building when I spotted it on the club stand. Largely intact, with the exception of the coal conveyor, this will be a great addition to my layout. It is an impressive 22cm x 4.5cm and is intended to be flanked on each side by a track, so lots of opportunity for shunting.
Gaugemaster SS-2 Electronic Station Stop Module - £5
The club stand had a whole box of these and other Gaugemaster automation modules and I couldn't resist at that price. See how I get on wiring this in on another layout
Lima Palethorpes Siphon-G Wagon - £8
I already have one of these for my layout and as I have a Palethorpes Sausage Factory as practically the only industry on the layout I deserve to have a small rake of these wagons.
Obligatory Running Video
The postman delivered my haul of secondhand track so work could start on my own Budget Model Railway Floating Shelf Challenge layout. As you can see the Coaling Station is already installed on the layout and pretty much dictates the theme for this layout.
