Jessie's Prints - Episode 47 - Nimbus the Goliath

This week, I are mostly been printing... A Nimbus!!

A birthday print for my clubmate Paul.  Sculpted using the heroforge app and then downloaded as an STL

The Heroforge Design

Paul got very creative using the heroforge and came up with this design.  The challenge for me was to try to print and then paint him without turning him another famous grey haired blue skinned chap... Papa Smurf.

It is also refreshing to have a render to paint from, relieving me from the complex task of designing a colour scheme.

Words of advice from a 3D Printing perspective

Whilst I love that heroforge exists there is a temptation for the wannabe designer to cram every facet of the mini with detail.  From a printer's perspective this is a bad thing.  Everything is possible when you have a $20,000 Selective Laser Sintering machine and you are making minis out of exotic materials like metal or resin powder.

However, when you are commissioning a print for an SLA printer you really need to consider how the model is going to be printed.  Typically this is going to be at 45 degrees on it's back as no one wants to be dealing with support material all over a character's face.

If you have sheathed swords or capes try to keep them close to the body so that they are supported rather than dangling in free space.  Don't go for the Michael Jackson pose where his cape is streaming out behind him in the wind as this will cause your printer do pull their hair out as they try to find somewhere to support the mini.  

Large volumes of cloth streaming out from behind a mini also mean that they have what I like to call a high "snapping moment" this is where there is a lot of resin supported only by one small section.  One false move or indelicate pick up and "click" there goes your cape leaving you to pray to the Glue Gods that it can be stuck back on again.

Merged Accessories and Paper Dolls

The other main gripe I have with Heroforge is that it is easy to model things that blend into one another.  For example, in the case of our boy Nimbus, his cape sprouts out of his pauldron and it is very difficult to tell where one piece starts and another ends.  

A real sculptor would understand that it would sit over top or underneath, a human form of collision detection, and appropriate sculpting would take place to remedy the situation.  Sadly this does not happen with Heroforge and there is no priority system in the software which detects these edge collisions and does something about it.  

It is effectively the digital version of the vintage Paper Doll toy.

Jessie's Prints - Episode 46 - Looot Insert Boxes

This week, I are mostly been printing... Looot Boxes!!

I am lucky to have a bevvy of machines to do my bidding and enable me to print in both style, Fused Desposition Modelling (FDM) and Stereolithography (SLA).  FDM is the perfect choice for projects like these boardgame organiser boxes.

Looot Insert - Thing 6661983    

This was a commissioned print for my colleague Stephen who is a mad keen boardgamer.  I used some Geetech Silk filament one of the cheapest I could get from Ali Express and I was blown away by the smooth texture.  

Definitely something I will look out for in the future.

 

OMG Another 5 Starblazer Comics

 

Yet more issues from my growing Starblazer collection

Starblazer #209 - The Ring of Gofannon - Through a nightmare of sorcery, Goll and his servant, Cutter follow the ancient maps of Gofannon in search of the legendary Ring.  Goll the warrior has to pit his fighting skills against all manner of unworldly creatures to merely survive and discover the truth.

Like every fantasy epic the ring of Gofannon is an archetypal quest to retrieve a magic ring and defeat a great evil descending upon the land.

Goll and Cutter must one by one overcome the trials and obstacles in their journey to find the legendary ring.  However, like every good Starblazer story there lies a twist in the tale, something unexpected which turns the story on its head.

The art for this story is great, simple when it needs to be and detailed when it needs to evoke a dense and rich background.  Very enjoyable and full of great one shot ideas for my own fantasy RPG stories. 

The cover art for this issue is a little bit uninspired.  However, this is what a fantasy story would look like if Sylvester Stallone was cast in the title role.

Starblazer #210 - Dragon Slayer - In a land overrun by evil, only one young boy had the courage and faith to seek out the warrior who could free the country from its sorcerous shadows - Dragon Slayer.., and he was 200 years old.

Another fantasy story, we must have hit the Conan the Barbarian vein in these recent issues.  The evil sorceror Drax has risen up and despite his magic waning he has enslaved the last of the Dragons Gorath to be his ultimate weapon and rule Pira IV unchallenged.

One brave villager and his son go against the wishes of the rest and vow to track down the legendary Dragonslayer who can free them from this cruel fate.  Sadly the villager is trapped by Drax and his son Bix must find the dragonslayer alone.

As ever we expect the Starblazer plot twist at the third act and this story doesn't dissapoint.  The final confrontation between Drax and the young lad Bix is a desperate but rewarding one.  The character of Bix is a shameless attempt at inserting the typical young reader into the story and it is very effective.  

I particularly liked the addition of the 6 legged scorpion tailed one eyed mini beholder creature which I will endeavour to write up a stat block for Savage Worlds and I will now forever call it a QERK!

Starblazer #211 - The Dream Machine - Kayn's the name, and finding people is my game.  Actually, I'm a private investigator, but I spent most of my trime trying to find enough creds to pay the rent.  Then one day I got a request for help... from a guy who'd been dead five years!

Kayn is back in another mystery chase murder story.  Futuristic Moscow is such an off choice for a setting.  I guess it's so that you can get away with simple brutalist architecture and a unbendening robotic state aparatus.  

Needles to say our hero Kayn is completely oblivious to the machinations of the secretive villain in this story.  He learns everything piece by piece at the same time as you read every frame.

Definitely a comic of its time with a run of the mill Starblazer storyline which is not all bad but very average. 

Starblazer #212 - Rogue Cop - Renko was a patrolman in a society diseased by corruption.  When this corruption touched him, he turned rogue to bring the offenders to justice.  But society doesn't like rogue cops and Renko was hounded to the edge of oblivion.

I was expecting a Robocop knock off but what I got was an interstellar crime wave and a man rescued from the brink of death by Space Brocolli!!

This is quite a fun little story, a classic tale of copy who goes rogue to bring down the big crime boss.  With no backup his luck runs out and he is stranded in the void with no hope so he decides to end it all by setting his ship to self destruct... as you do.

Saved by the benevolent space brocolli the Shreel, they turn him into a cyborg monster sending Renko into a depressive tailspin.  Howver, vengeance is a powerful emotion and Renko uses it to gain control of his new robotic body and take the fight to Hengis Furgaar to destroy his criminal emire once and for all.

Starblazer #213 - Skarr The Soldier - Stranded in Samek, many thousands of miles from his home, Skarr, the soldier of fortune, had to fight for a foreign ruler and an alien cause - or be executed!

This is a fairly stock story of a man caught between two factions waging a war at all costs.  There is not much exposition only action and it really does seem like an exercise in getting as many wild character illustrations on a page as possible.

This a treat from the fine pen of  Enrique Alcatena with an epic cover from the legend Ian Kennedy.

The character art is wild from the weird almost Napoleonic uniforms of the Margolian army to the down right bizarre mix of kimono clad Tarcils and the mask wearing denizens of Hetamec.  

This is my first Skarr story and I am encouraged to find the others.  

Whilst the plot does not offer much for the Roleplayer or DM, the artwork is a smorgasbord of inspiration.

Essential Starblazer Links

The Starblazer Checklist is a fantastic resource if you are collecting or want to know who wrote and illustrated each issue.

Many thanks to the chaps who run the Starblazer Covers archive, this is immensely useful resource when looking at ebay joblot listings.

Retro Sanctuary has a great article covering his top 20 Starblazer Issues which is worth a look and I'm looking forward to reading and reviewing some of these classics in the very near future.

 

Mega City Block Upgrade - The Okey Dokey Chef

Once you start pimping out your Mega City One Block Storage Case it's hard to know when to stop...

The Okey Dokey Chef Animated Sign

I wanted my sign to be an advertising hoarding and one of the most famous signs in Mega City One is the Okey Dokey Chef as featured in the Supersurf 7 race story Midnight Surfer (progs 424-429).  I was also inspired by the famous Vegas Vic neon sign whose arm waving welcomed gamblers from all around the globe since 1951.

He wold make an excellent starting point to learn about how to control low voltage RC servos with Arduino.

The Chef

I found a nice piece of clipart online which had the vibe I was going for and imported this into GIMP for editing.  

I cut out the "Chef's Kiss" hand using the lasso tool and moved this over into  a seperate file.  This is going to be the sweeping hand which we will animate later using a servo.

I added a speech bubble with some appropriate text coming out of the side of the chef's head. 

Preparing for Tinkercad

I have learned that Tinkercad is a pretty simplistic modelling tool and it does not particular like creating complex curved or polygonal shapes.  The easiest way to solve this conundrum is to simply create a solid black mask version of your line drawn artwork.  This can be used as a background and because both shapes are exactly the same image size, they will register perfectly together when you import them into Tinkercad.

When I was happy with both files, I and exported them (and their solid black mask counterparts) as a PNG then converted into an SVG using convertio.com.  Each line drawn SVG is imported into Tinkercad for extrusion into a 3D object using the same technique I used to create my badges and Index Card RPG Card Back Stamps. I use an extrusion height of 30mm.

The black mask variant is then imported and the combined shapes exported as a single STL.  This gives me an STL file for the chef and a file for the arm which can be printed on the Anycubic Photon M5.

The Electronics

The core of this project is an Arduino nano.  These little boards are stupidly cheap and really easy to start your coding adventure.  Seriously, if an idiot like me can do it then anyone can.

The bit doing all of the moving is a 9g 5v 180 degree hobby servo which I bought in a twinpack from Ali Express for £1.79.

This was superglued across the gap between the Speech bubble and the chef's arm.

The Wiring and Code

I used the excellent How to Control Servo Motors tutorial on the makerguides website.  The servo has 3 wires Red (5v Power) goes to the 5v pin,  Brown (Ground) goes to the GND pin and the Yellow (Signal) goes to Pin 9.

The code example given is perfect for my purposes, but I did need to customise the start and end positions for the hand as it does not need to run the full 180 that the servo is capable of.  I also added a 500 millisecond delay at the end of each travel.

#include 

Servo myServo;  // Create a Servo object

void setup() {
  myServo.attach(9);  // Attach the servo to pin D9
}

void loop() {
  // Move from 30 to 135 degrees
  for (int pos = 30; pos <= 135; pos += 1) {
    myServo.write(pos);  // Tell servo to go to position in variable 'pos'
    delay(45);           // Wait 15 milliseconds for the servo to reach the position
  }
  delay (500);
  // Move from 135 to 30 degrees
  for (int pos = 135; pos >= 30; pos -= 1) {
    myServo.write(pos);  // Tell servo to go to position in variable 'pos'
    delay(45);           // Wait 15 milliseconds for the servo to reach the position
  }
   delay (500);
}

Troubleshooting

In my naievete I thought that the Arduino nano would be able to power this whole project.  However, the little servo apparently draws too much power to run continuously causing the nano to reset itself and creates some erattic animation.

I tried to mitigate this by adding increasing the dealy to 45 thereby slowing down the move, but sadly this was not enough.  It would have been nice to know all this from the start as an alternative board such as an ESP32.  

Anyway that is another story.  In the meantime check out the final result

Download the Files

I have also uploaded the Okey Dokey Sign STL files to Thingiverse if you should want to make your own version of this iconic comic book sign.

Let me know if you found this useful or if you have made your own animated signs for your own games

Boardgame Rescue: Waage Mut

One of the joys of being a boardgame collector is finding one of those long out of print games that only about 20 people admit to owning on BGG.

Waage Mut - Schmidt Spiele (1982)

I picked this up on one of my regular thrift shop trips for the princely sum of £2.  Clearly this was some sort of manual dexterity / balancing game which is usually enough to make me run for the hills, "I'm looking at you Bausack!!"

However, the cover photo featuring a five armed plastic balancing spider intrigued me so it came home.

Google lens translates the box cover as - "LIBRA COURAGE - Anyone who doesn't weigh things up and bets wrong. blurs the victory".

An Incomplete Game

The risk of buying any game in a charity shop is that it comes with missing pieces.  For a common game such as cluedo or monopoly this presents no problem as the pieces are readily available.  However, the older and rarer a game gets the more difficult it becomes to acquire replacement parts.

This is where the 3D printer shines and so I quickly knocked up a replacement blue pawn in Sketchup

If you are missing a pawn you can download a free STL file from:

1. Thingiverse - Thing 6773663
   
2. Cults 3D - Waage Mut Replacement Pawn
   
3. Printables - Waage Mut Replacement Pawn
   

Of course having the abilitle to churn out replacement pieces means it is a trivial exercise to print out a whole 5th player set of pawns.

The Rules (English Translation) 

Sadly the game does not come with rules in English and so Google Lens came to the rescue.  I will be giving this to me my German friend Jonas who can do a proper translation.

LIBRA COURAGE

For 2 to 4 players ages 4 and up, fun for the whole family.

 

The weights must be cleverly distributed in order to achieve as many points as possible without the star. to cause it to tip over. Who doesn't weigh up and. If you put it wrong, you lose your victory.

Preparation:

 

The arms are attached to the center piece and the resulting star is inserted into the stand. Each arm has 6 holes marked 1 (center of star) to 6 (outermost edge).

Gameplay:

Each player receives 6 weights of one color (if there are only 2 players, each player receives 12 weights).

 

A weight is alternately inserted into each hole. If the weight causes the star to tip over, it is removed from the game and may no longer be used.

 

Weights can also be "caught" by placing your own on them. This is an advantage, especially with weights with high points (in holes 5 or 6).

 

The game round ends when all players have set their weights. Each game consists of as many rounds as there are players, so that everyone has the advantage of placing the last weight.

Evaluation:

Each weight is evaluated based on the score of the respective hole. If several weights are stuck in a hole (they have been “caught”), all points are added together and they are credited to the player with the highest weight. 

 

Whoever was able to collect the most points won.

More Photos

 

A Potential Roleplaying Puzzle?

Imagine a scenario where each player enters a large chamber at a different arm of the balancing beam.  Looking down they see only darkness.  Their goal is on the center pedestal, they must combine their movement to ensure that the beam stays balanced and they can get to the center.

 

When they fall do they fall to their deaths or just disappear into the darkness?

To add some peril have some wandering creatures like spiders move onto each of the arms.