Sci-Fi Ship Morphs Part 4 - More Basic Tiles

Here are some more basic tiles for you to fill with your own furniture.

With Doors

Without Doors

Daves Mapper

All the tiles for this and previous posts in this series have been uploaded to Davesmapper.com, so go get mapping!

Previous Posts in this Series

• Part 1 - Getting Back on the Morphing Horse
• Part 2 - Guns, Guns, Guns
• Part 3 - Cryo Tubes, Mess Hall, Transporters and Drop-ship

Goblin Aid - Raising Money for Kevin "Goblin Master" Adams

On March 20th, Miniature sculptor extraordinaire Kevin "Goblinmaster" Adams was brutally attacked in his own home by a couple of scumbags.  Thankfully, Kev survived the attack but suffered some pretty serious injuries.

The gaming community has rallied to support Kev in his time of need and, thanks to Ian Brumby (Fenris Games) and John Atter (Frothers Unite), The charity facebook page Goblin Aid was launched.  Unfortunately I passed on Salute this year, but Wargames Foundry were selling a "snorklings" blister of 6 miniatures including a self portrait mini of Kev.

Dear Tony Blair... has an excellent update post showing all the "greens" which have been donated by sculptors the world over to be cast into a series of boxed sets to raise money for Kev.

Thanks also to James "Grim" Desborough of Postmortem Studios for passing on the news.

DIY Gelatinous Cube

Finn gets half eaten by "Jelly Cube"
Adventure Time with Finn & Jake

Gelatinous cubes are one of those classic dungeon monsters you need in your DM's arsenal, in fact I'd go so far to say that if you haven't encountered one you need a new DM.

The commercially produced miniatures are on the whole way too expensive but here's a list in case you have no modelling or DIY skills.

• Otherworld Miniatures - The go to guys for OSR style fantasy miniatures have 3 versions;  DM16a Standard (£15), DM16b Deluxe I and DM16c Deluxe II (£25).  These are very useable and to the usual Otherworld Miniatures sculpt standards, but pricey all the same.
• D&D Miniatures - The Desert of Desolation series of minis introduced which you can still pick up (if you have deep pockets) on ebay for £40.  One for the serious collector I think.

Standing on the Shoulders of Giants - The DIY Roundup

There are basically two ways to tackle this, solid or hollow.  Making your gelatinous cube solid has a number of advantages namely that it will be extremely sturdy durable and you can embed miniatures and other items inside for that partially digested look.  However the cost of resin can be high and it's not a material everyone feels confident using. 

The obvious advantage of the hollow cube is that you can put your PC's miniature inside it and there's a weight saving.  It's a purely personal choice, but here's a quick round-up of the more prominent jelly cube makers out there on the interweb.

Solid DIY Gelatinous Cubes

• Sean K Reynolds details the process of making his solid resin cubes with hirst arts moulds.
• Big Lee has an adventure making a solid resin version.
• Michael Curtis made his solid version from wood and joint compound.
• Fat Dragon Games has a papercraft gelatinous cube in their Dragon Tiles: Tombs and Horrors set for $7.99 but all I want is the cube itself.

Hollow DIY Gelatinous Cubes

• Dungeons & Digressions shows you how to make a quick and dirty cube from acetate.  
• Damian posted his interesting hot glue only homemade version on ENWorld.
• Dungeonmaster Mark has a video of his great looking hollow gelatinous cube on Youtube.
• Djpiebob just uses 4 chessex dice boxes for his cube.

Make it the Roleplay-Geek Way

You will need:

An old shirt box, ripe for recycling

• Acetate - I got mine from an old shirt box (I bet you have some old packaging lying around) so was this was essentially free and made me feel good about reusing and recycling.  Most come clear but any colour will do, it just has to be transparent.

• Hot Melt Glue Gun - I picked mine up from a discount store complete with a couple of packs of sticks for £3, but most DIYers and hobbyists will have one of these already.  If you don't have one of these you can use superglue, but make sure that you add some gluing tabs to your box grid (see Step 1 below).
• Pen - A Sharpie or other non branded fine permanent marker (like a CD Pen).  Green or Blue are best, but any colour will suffice.
• Sandpaper - Wet & Dry is best to minimise coarse scratches but essentially any sandpaper will do the finer the better.
• Ruler - for marking, cutting and folding your acetate.
• Craft Knife - for cutting your acetate.
  
  
• Sticky Tape - for holding your cube sides together as you glue.
• 30-60 Minutes of Your Life! - You won't ever get it back but you were only going to waste it watching TV or reading some other persons blog.

Acetate marked out in "Cross Pattern"

Step 1: Get your sheet of acetate and mark out a grid of 2 inch squares (50mm) in the standard folded out cross pattern you learnt in high school geometry class using the pen and ruler.  Like so:

If you want to make a hollow box, cut out a smaller square (approximately 40mm) from one face, usually the end one in the cross pattern. 

If you're using superglue it's a good idea at this stage to leave a thin glue tab around each of the faces as it's really tricky to glue edge to edge without seepage and the inevitable fingers stuck together.

Acetate cut, scored, folded and scuffed

Step 2: Making sure that you have the marked side face up, cut out the acetate cross and score along all the fold lines using the blunt side of the craft knife.  Using the ruler as a straight edge will help you make sharp folds.

box taped and glue up in progress

Step 3: Again, making sure that you have the marked side face up, take your sandpaper and rub along all the inside faces edges to both scuff off the pen lines and to give it a frosted look.

Step 4: Tape each side one at a time and glue the edges together.  The hot melt glue may heat up the plastic and deform your box sides but don't panic at this stage.  Beware, the hot melt glue is exactly that, HOT! and will take a while to cool down, so try to avoid the temptation to touch it as it will burn you, stick to your fingers and go all stringy. 

If you're using superglue instead of hot melt glue try to avoid getting any on your fingers as it's a real pain and you will get finger print marks in the acetate. 

Extra drippy effect applied to outsi

Step 5: When all sides are glued and cooled, strip off the tape and repeat the process on the outside edges.  You can drip hot glue (or PVA) from the top face down each side for that extra... drippy look.

Eh voila, you have a super cheap Gelatinous Cube, or as we say in Sarf East Lahndan, "Jellied Cube for nish, mate!".  You can make your cube's as big or small as you like and in as many colours as you like. Try spicing it up by by glueing miniature swords, shields or bits of that half butchered skeleton you have lying around your bits box, to the inside faces

With a bit of creativity you can use hot melt glue and acetate for all sorts of things like flying stands, Tenser's Floating Disc, magic portals, Walls of Ice, Fire, Force and Fog or any of the Bigby's Hand spells.  Let your imagination and hot glue flow free!.

Finished gelatinous cube happily munching on a GW half-orc

Sci-Fi Ship Morphs Part 3 - Cryo Tubes, Mess Hall, Transporters and Drop-Ship

Continuing the intrepid adventures of SS Morpheus, this week we add:

Cryo-Tubes and Mess Hall

For those deep space missions where you have to go to sleep during the long journey. This also introduces a new basic standard tile.

Without Doors	With Doors

Teleporter Bay

Unless you have a shuttle, you need a teleporter to get you planetside.

Teleporter Room

Shuttle

If you're gonna have a shuttle you might as well have a dropship, just remember to shut the doors when you've left.

Dropship / Shuttle	Shuttle Bay Doors Open

Escape Pods

If you need to evacuate the ship use an escape pod and always come in handy for secret meetings, just don't let the computer lip read what you're saying... 

Escape Pods

Daves Mapper

All the tiles for this and previous posts in this series have been uploaded to Davesmapper.com, so go get mapping!

Previous Posts in this Series

• Part 1 - Getting Back on the Morphing Horse
• Part 2 - Guns, Guns, Guns

Oblique Strategies - Musical Fun with Brian and Peter

"The internet... if you're not learning a new thing every day then you're doing it wrong."

Brian Eno - Games Designer?
©Rolling Stone Magazine

Today's new thing (well new to me anyway) is that noted producer and all round musical genius Brian Eno is also a game designer.

In 1975, he and Berlin born British artist Peter Schmidt, released Oblique Strategies, a limited run of 500 boxed sets of 113 cards signed and personally given as gifts.   Each card contains an inspirational phrase, question or dilemas designed to focus artists on other ways of solving problems and avoiding creative block.

in the early 80s Eno went further, creating his "Games for Musicians" for the recording sessions of the David Bowie album Outside.  Some of the characters he came up with would not look out of place in a William Gibson novel and on it's release Rolling Stone's critical review aptly characterised it as having a "jury-rigged cybernoir narrative".

It occurred to me how fun it could be for a Neutral (or Chaotic) PC to be furnished with a deck of these cards and for their player to respond to the whims of each card.  A cartomantic verison of The Dice Man, you could even make this into a cursed magic item like the Deck of Many Things.

Thanks to Sword & Backpack for leading me to this little gem and thanks also to Gregory Taylor who hosts a fine Oblique Strategies resource page.

In case you were wondering how much you have to pay for a 1st edition signed copy, ebay has one listed for $4,999!!

The Eno shop will also flog you a brand new (unsigned) copy for the princley sum of £30.  For technocenti an e-version is available at