Jessie's Prints - Episode 36 - Itsy Bitsy Drop Pods

This week, I are mostly been printing... Teeny Tiny Drop Pods!!

Isn't it just the way you wait ages for a commissioned print and two come along at once.  This time it's my work chum Gary who needed some drop pods for an upcoming game of Adeptus Epicus or something like that.  You know the one, the latest hotness from Games Workshop.

StarPorts - P.O.D. (Print on Demand) Droplets - Cults 3D

I don't really have much to say about these other than I managed to get 5 Dreadnought sized pods on one build plate and eight of the smaller unit sized pods on a second.  Print time was about an hour and a half each.

The models came well supported but the packaging of the files was a bit weird.  Extracting the zip file dumped 3 folders on my desktop; a Lychee scenes folder, a supported STLs and an Unsupported STLs.  I was not expecting this and so I thought that the zip file hadn't actually unzipped.  Weird.

I always opt for supported files and as I was leaving these on the support rafts for Gary to get the full experience of removing supports 😂 I didn't bother to check if these were hollow or not.  I assumed that they were solid.  To my surprise, and as you can see in the image above, these were actually hollow which explains why they came out of the wash & cure station a little sticky.  They had actually trapped a huge amount of resin in the hollowed out sections as it effectively formed a cup with nowhere for that resin to drain out of because they print upside down.

If I were printing again I would add my own supports and orientate them so that the unused resin can drain away whilst still being attached to the build plate.  A minor gripe I know but sometimes these things matter.

Anyway, as you can see these are considerably smaller than the full size drop pod for WH40K.  Aint they cute 😃

Can You buy Good Hobby Products from Wish.com in 2024?

Earlier this month I blogged about my experience buying hobby products from AliExpress in 2024, this time I turn my attention to Wish.com.

104pcs Simulation Static Grass Tufts Model Mini Grass Cluster - £4.06

My basing game has been pretty weak of late.  Trix Robot Rider needed some desert vegetation to add a little va va voom so I chose these mini grass tufts.  Herein lies the problem when you are buying stuff from Wish, you are entirely reliant on the chinglish descriptions that the vendors provide.  They often list multiple pack sizes or products in the same listing and sometimes it's hard to know what you are buying.  

The upside is of course at these stupidly low prices you can often order multiple different options all for less than the price if you were to go to a big box retailer like Hobby Craft.  If you want to try out a hobby product for not much outlay the online vendors on Wish.com are a fairly safe way to do it.

These tufts are quite small and measure 5mm in diameter.  This might be what the number 5 on the box refers to.  In their defence it does say mini... 

I added a few of them to Trix's base and I really think that they add a certain something.  

Perhaps on a smaller miniature base they would have much more impact.  I will try to buy some bigger ones in future. 

50pcs DIY Craft Party Alligator Clamp Wire Clip - £3.74 - 3/5

I had seen GroundAffected suspend his resin parts for priming on these alligator clips so I bought a bag of 50.  To be honest the clips are not really strong enough to safely hold larger parts but for small 32mm miniatures they are going to be a godsend. 

There are obviously 2 parts to any painting jig, the thing that attaches to the bit you are painting and the thing that that thing attaches to, lets call it a base.  Having a sturdy base is just as important  

Clearly I am going to have to design and print some sort of hobby clip base or print out something like this Alligator Clip Stand by retro-stingray.

If I were buying again I would opt for longer wires as I think the ones I bought were mainly designed as table card holders.

60g Six Colour Flock Adhesive Nylon Static Grass Powder - £2.51

Wow this is great value considering a similarly sized bag of grass from a well known retailer is 3 times the price and only comes in one colour.  I now need to build a static grass applicator like Luke Towan  

UV Resin - 50g UV Resin Ultraviolet Curing Epoxy Resin Crystal Clear - £1.28 5/5

I have wanted to try out some of this clear UV resin for a while.  I have a large bottle of the stuff for my 3D printer but it doesn't set quickly enough when making things like pools of lava or green ooze.  This little bottle was cheap enough that I don't care if it works that well.

I am glad to report that it works really well, just 5-10 seconds under my pretty weakass UV torch and it sets rock hard.  I have a big lava base project in the works and this will be just the ticket for greating that glossy flowing lava.

A DIY Funny Wooden Sailing Boat Model Kit 1/50 Scale Ship £5.42 - 0/5

I would love to say that this is an amazing model and a fun way to spend a Sunday afternoon, but I can't.  Sadly the vendor cancelled the order unilaterally.  This happens from time to time on Wish.com, often when the price is too good to be true.  

I've seen this kit on AliExpress so maybe I'll try another order... ooh a stirling steam engine!

Another 5 Starblazer Comics Reviewed

 

Yet more issues from my growing Starblazer collection

Starblazer #187 - Mind Warrior - In the battle to keep the warlike alien hordes at bay, the Terran Army used no end of ingenious devices in combat.  None were successful, non except the most ingenious device ever developed - The human brain...

This is a pretty average story where a crack group of Earth commandos need to neutralise the alien Zarg superweapon.  They discover that the Zarg are using a device known as the Time Gun to de-materialise asteroids and crash them into ships and space stations.

The eponymous "Time Warrior" doesn't turn up until page 40 and the book is only 66 pages long.  The plot leans heavily on deus ex machina which is incredibly lazy but does lend itself to the cliffhanger nature of all Starblazer storylines.  The hero usually saves the day by utilising some trait or technology that hasn't ever been discussed before.

Mind Warrior is particularly guilty of this in the final scene, I won't spoil it but even I had to do a doubletake.  Perhaps my nine year old self would not have been so critical... 

Starblazer #191 - Carter's Law - Frank Carter was a policeman in the huge Terran galaxy of the 32nd century.  His job was hard, lonely and extremely dangerous.  But he didn't mind - the harder, lonelier and more dangerous a job was, the more he liked it.  Carter was hated by some and disliked by most, but he was used to it.  He was half man, half android and completely mean.

This one's a gripping tale of corporate espionage as Carter and his newly appointed sidekick Dolan break every rule in the book to bring their quarry to justice.

Some top notch art for this episode which draws inspiration from news photo libraries of the day.  Repurposed images of riot gear wearing cops and a beautifully drawn ferret armoured car would have been very familiar to young readers watching news footage of the troubles in Northern Ireland.

Carter is much more dramatically posed and his dialogue much fruitier than his first outing.  Could he have been inspired by early Dredd's one liners or is he channeling Clint Eastwood as a robotic Dirty Harry?  A solid second outing for our favourite mandroid.   

Starblazer #198 - Time Warriors - They were fighting men from the past, transported thousands of years into the future, and put in a life or death situation with a technology beyond their understanding.   

A cool concept for this story.  Six warriors from across Earth history are "drafted" to fight for a peace loving alien race to save the planet Paxos from domination by the dog headed Korvans. 

The fight takes place in an Arena and like ancient gladiators each warrior is pitted in single handed combat to the death against a Korvan adversary.  Galactic rules govern how the deathmatch is conducted and the primitive warriors must get in close to use melee weapons to deal a deadly and decisive blow.

This story could have had a great twist at the end, but the execution feels like a missed opportunity and a waste of a great sci-fi title.  It's a shame because the art is pretty good especially in the early pages where the warriors are plucked moments from death.  This storyline gets recycled in the movie Predators (2010)

Starblazer #199 - Netherworld - Mikal R Kayn never went looking for trouble - it came looking for him.  Involved in a simple motorway shunt, he didn't anticipate much bother.  But he hadn't bargained on the body.

Ex cop turned Private Eye Mikal Kayn digs a little too deep when he finds a partially disintegrated corpse.  Someone doesn't want the case investigated and tries to set Kayn up. 

This is a really fun story and one that could easily work in Mega City One.  I really appreciate the clean lines of Jose Casanova's artwork.  His depictions of the weird and wonderful denizens of Netherworld and of the jungle planet Babalon make this story pop.  The character arcs of Cinnibar and Rulf are never really explained hopefully later Kayne stories will right that wrong.

Kayn is a great character, taken straight from the pages of a Mickey Spillane detective novel, a futuristic Mike Hammer who wears dark glasses to protect his infra-red eyes.  I'm going to look forward to reading more of his exploits in coming issues.

Starblazer #208 - Planet of the Dead - Thieves, Killers and Conmen... it didn't make any difference to Borg the Bounty Hunter.  He'd hunt them to the far reaches of the galaxy and bring them to justice.  He thought he'd seen it all till he came face to face with Baal.  This evil creation didn't just kill people... it sucked the very life force from them!

This story is a weird mashup of survival horror and an oddball team up between Borg and his two captive conmen against the evil space vampire Baal.

The artwork is serviceable and the character design on point as all vampires of this era wore black cloaks with high pointy collars.  Of course space vampires don't drain your blood they drain your life force and feed upon it making them ever stronger.  

Whilst there's not much to the story, it's a long chase sequence, there are some cool looking locations, landscapes and pirate ships on wheels.  All good worldbuilding fun for the princely sum of 28p...  

Essential Starblazer Links

The Starblazer Checklist is a fantastic resource if you are collecting or want to know who wrote and illustrated each issue.

Many thanks to the chaps who run the Starblazer Covers archive, this is immensely useful resource when looking at ebay joblot listings.

Retro Sanctuary has a great article covering his top 20 Starblazer Issues which is worth a look and I'm looking forward to reading and reviewing some of these classics in the very near future.

Jessie's Prints - Episode 35 - 3 Goblins in a Trenchcoat

This week, I are mostly been printing... 3 Goblins in a Trenchcoat!!

3 Goblins in a Trenchcoat - MZ2450 Patreon 

Our Friday game at Dragons Keep Roleplay Club has seen us sucked through a portal onto one of the levels of hell called Las Infernalis.  Basically this is Disneyland for Demons and I'm sure is going to full of weird and deadly rides, games and equally weird characters.  

Having recently joined the MZ2450 Patreon, imagine my surprise when I stumbled on a recent post containing an STL for this guy!!

This is exactly the sort of mini that floats my boat and so I quickly printed and painted him and sent a photo off to Alex the DM.  He's a very amenable sort of chap and we share a love of weird cinema.  His reaction was classic and I expect to bump into this trio of ne'rdowells in the very near future.

 

Miguel also does a version with 5 Wyrmlings in a Trenchcoat which is totally not Tiamat!

Three Halflings in a Trencoat (D&D 5e)

A very creative Reddit user put up a statblock for the 3 Halflings in a Trenchcoat for D&D 5e games.  It would be a very challenging encounter and seems rather overpowered to me.  It is written more as monster statblock and perhaps something that occurs as a consequence of donning a cursed magical trenchcoat which must be filled with 3 of something... Mwahahaha  

Origins of the Totem Pole Trenchcoat Trope

This is one of those prints that irrespective of age we all seem to instinctively have a memory of it from our childhood.  According to TV Tropes this is known as the Totem Pole Trenchcoat but there is no reference to a historical origin.  I seem to remember an episode of Wacky Races or The Perils of Penelope Pitstop where the Ant Hill Mob used this technique.  

 

Fun Fact, the names of the members of the Ant Hill Mob are different in each show.  In Wacky Races they are: Clyde, Ring-a-Ding, Mac, Danny, Rug-Rug-Benny, Willy and Kirby.  Their car is number 7 The Bulletproof Bomb.

  

 Whereas in The Perils of Penelope Pitstop they are called, Clyde, Dum-Dum, Softy, Yak-Yak, Snoozy, Zippy and Pockets.  Their car, Chug-a-Boom, is much more of a character in its own right in some episodes of this series,  It gets the classic headlight eyes and is voiced by the late great Mel Blanc  

If you know of any earlier uses of this trope, please feel free to comment in the box below.

Can you buy good modelling accessories from AliExpress in 2024?

I have been playing Wish and AliExpress bingo for a while now.  It can be a dangerous game, but if you've got a few quid that are burning a hole in your pocket, there are worse ways to spaff it up the wall. 

Now this isn't one of those exercises.  I genuinely needed some specific items and thought I would put each store to the test.

HobbyMio Sci-Fi Decals (maybe a bit of a Gundam theme here) - £1.83 - 4/5

You may have seen my recent print of Trix Robot Rider on these pages.  I'm really happy how she came out but the robot hand is crying out for some decals.  I had a look on AliExpress and was stunned by the sheer volume of waterslide decals that are available at some extremely good prices.  Most of these are replacements for specific Gundam kits but there are some which are just generic.  

I chose the HobbyMio Model Decal Vol 1 set and I'm really impressed with the diversity of symbols warning signs numbers which come in the set.  They are a mix of black, white, red and yellow with plenty of variety to sticker up your robot.  I'll update this post when I've used some to let you know how they come out and how easy they are to lay down.

12Pc Set 21x15cm Leopard Print Grafitti Stencils - £4.21 - 3/5

When I painted the wings of my Ulimate Radical Centrist B'lakor Demon, I used an old orange bag as stencil mask to get a diamond pattern.  It was okay, but very fiddly and I had seen some of the AFV modellers on YouTube using some splatter masks so thought I'd try one.  

I think I ordered the wrong thing as these are considerably larger than I expected.  With 12 different patterns to choose from these are still very useable for bigger models.  In the set are a:

• Leopard Spots - each spot ranges from 1 to 2cm 
• Waves - 11 different wave patterns should look good for water effects or Chris Foss inspired shampoo bottle spaceship patterns
• Bubbles - well I don't know how to describe this stacked bubble design.
• Large Tiger Stripes - again very useable if you are doing a tiger striped camo theme on a vehicle.
• Voronoi - small holes measuring 1 to 1.3cm across.  Very useable for dragon hide or interior wing patterns.
• Square Cells - an irregular collection of 4 sided holes with rounded corners.  This is going to be an absolute must for that cracked earth look.
• Large Zebra Stripes - same as the Tiger stripes
• Lizard Skin - a tighter mesh of diagonal holes.  Great for any large lizard (wink, wink)
• Squished Lizard Skin - a mesh of varying sized organic shaped diamonds large on the edge to tiny in the middle.  this is going to get a lot of use I can tell.
  
• Rust Splatter - that collection of irregular shapes which the AFV guys go wild for 
• Swoopy Curves - this is less useable in my opinion and will probably see action when I just want to define a swooping curve in much the same way you might use a french curve.
• Large Irregular Cells - again this is likely to see use in large base texture shading.

I will give them a whirl on my next 3D printed mega project which is currently staring at me with it's five fearsome heads.

Hobby MS Small Wet Pallette Set - £3.59 4/5

I've always wanted to try out a wet palette, but they are kind of intimidating and come in at around £20 or so.  I thought I'd try out one of these little travel palettes to see how I get on.

The box measures 21cm x 7cm and has two compartments, one for the palette and the other I am guessing is a water supply section.  Included are 10 sheets of "baking paper", two absorbent blotters, a thick white foam pad and a strange square metal grill.

I will have to learn how all of this goes together and how to use it as it did not come with instructions, but I did find this video on how to use it.

I'll report back with my findings...

Postage Not Included

The total I paid for all three items was only £15.83 so that was £6.20 for flat rate shipping and delivery took just shy of 8 calendar days.

Given that a pint in a london pub in 2024 is about £10 these days I think I'll try this again.  Tune in again soon for a review of some Wish.com model making goodies.

Even More Starblazer Comicbooks

Some say I should not be left alone with eBay, but I say let's read more Starblazer...

Starblazer #171 - Star Knight - Released from a million year imprisonment, the most evil being in the galaxy unleashed eons of hate and unimaginable fury on the race he blamed - the inhabitants of Earth.  But he had to pit his evil skills against Earth ace troubleshooter - STAR KNIGHT.

This strip is a unabashed mashup of the origin story of superman and the plot of Alien.  The protaganist Rorta, is an alien cyborg warrior with dreams of intergalactic conquest imprisoned in a stasis egg by the benevolent Syran elders as punishment for his treachery.  

A million years later he is accidentally released by some space archeologists looking for alien artifacts.  Rorta goes on to capture an experimental space weapon and only the brave Star Knight, Li Opurney, can save the Earth from destruction.

This story suffers from a serious case of the deus ex machina, as both Rorta and Star Knight overcome adversity with ease deploying numerous unheard of technologies.  A hordroid; las shields, laser lances densitrax mining ships, nullgrav beams, it's all here waiting to implant itself in a young furtile imagination.  There are some weird looking spaceships that look like they jumped out of the pages of a Terran Trade Authority Handbook. (I must get around to writting a blog post about them someday). 

Starblazer #172 - Nightraider - They made the Mafia look like a charity organisation.  He was the only person who could stop them.  They had unlimited credits, men and mchines.  He had one craft and three helpers.  They were the Kratos... He was Nightraider.

Let's face it Nightraider is a cool pseudonym, but when your real name is Garry Clark you need all the help in the universe you can get in order to strike fear in your space mafia adversaries. Fighting at his side are Ursa, the blind Triton navigator who can "see" using his Neuroweb helmet.  Samuro the Cygnan samurai armoured weaponmaster and Typhon the sensor operator and all round fifth wheel.

This is a fun little galaxy hopping story chasing down mafioso whilst dealing with the thorny subject of xenophobia.  The plot takes a twist about a third of the way through when it is revealed that Nightraider's own built-in arm weapon, a deadly neutron beamer, exposes him to fatal Q radiation.  The helpers must get Nightraider back home or he will die, 

I love how the writer borrows the then new fangeled "microwave cooker" technology and turns it into a deadly weapon.  I won't spoil the ending for you but it caught me by surprise.

Starblazer #179 - Mandroid - He was a cop. A good cop! Too good for his fellow enforcement officers, some said.  Some others said he wasn't even human - and they were right.  He was Carter, and Carter was a Mandroid.  Half man, half android and whilly mean.

This is my first Carter story and it's a corker.  High stakes action on every page and it was a gripping read.  Carter definitely has shades of Judge Dredd and Robocop in his character and this story really lets that shine through.  The art by Enrique Alcatena is fantastic, very dynamic and full of inventive costume design.  I felt it was reminiscent of my favourite Dredd artist Ron Smith.

The story starts out as a murder investigation on a remote mining planet but quickly evolves into a tale of robot revolution.  Carter is the perfect protagonist for this story, being half robot himself means he straddles both sides of the conflict.  A classic Starblazer issue and one that comes highly rated.

I can't wait to see what happens in the next Carter storyline in issue #191 Carter's Law

Starblazer #181 - Death Trek - Sergeant Wilse T Force was surly, bad tempered and hated the war.  He owanted out, and the only way he could do that was to obey orders, no matter how difficult they were.  His job was complicated by two things... a bunch of recruits he had to wetnurse through the Badlands, and an enemy commander who wanted him dead - for personal reasons.

This story feels like it is ripped straight from the pages of Commando, another very popular "War Story" title from Starblazer Publisher DC Thompson.  Our hero is trapped behind enemy lines and orders come through to evaccuate the planet.  He just has to get his men to the safety of the rendezvous point in time or be left behind.

Sgt Force and his men have to survive encounters with the strange alien life on the planet whilst being chased by the Carthan enemy soldiers.  The powered armour troopers are equipped with a host of wepons and gadgets to help them survive, but being green recruits they need a veteran like Force to keep them alive.

Solid adventure story stuff and a great read.

Starblazer #183 - The Cyborg Chaser - It was 2086AD, and the Earth was in the grip of a drought.  Only androids and cyborgs could work in the intense heat while humans stayed in their controlled areas.  The companies that manufactured cyborgs grew more powerful, until they all but ruled the world.  Faced by secrecy, World intelligence decided to penetrate the largest firm, Cyborg Corporation, and they sent in Britt the Commando, a one man army, a CYBORG CHASER.

The cover illustration brings together two great cinematic images, Max Von Sydow's Ming the Merciless as Arrigon the Head of a Andro Corp and Sean Connery's James Bond as Britt the Commando.

This is an interesting story of global domination being foiled by a super spy and perfectly fits into the Starblazer mould like a hand in a glove.  Being an anthology comic, you never knew exactly what you were getting every other week.  Unlike 2000AD or Star Lord, there was no stable of regular characters who appeared every week.  What was guaranteed were solid adventure story lines with action on every page.  

In the 80s we used to judge our action movies by their kill count, perhaps we should do the same with our Starblazer issues?

Essential Starblazer Links

The Starblazer Checklist is a fantastic resource if you are collecting or want to know who wrote and illustrated each issue.

Many thanks to the chaps who run the Starblazer Covers archive, this is immensely useful resource when looking at ebay joblot listings.

Retro Sanctuary has a great article covering his top 20 Starblazer Issues which is worth a look and I'm looking forward to reading and reviewing some of these classics in the very near future.

Jessie's Prints - Episode 34 - Teenage Mutant Sorceror Tortle

This week, I are mostly been printing... A Tortle!!

Epics N Stuff Tortle Sorceror - MyMiniFactory - 109539  

This week saw us return to The Rivenlands D&D Campaign at Dragons Keep Roleplay Club.  My clubmate and fellow founder Paul needed a mini to represent his Tortle Sorceror so he commissioned me to print and paint a supplied STL. 

He's a chunky boy and basically pyramidal in shape.  The mini came both pre-supported and unsupported, as is common these days.  However, he also came as a pair of pre-hollowed out variants for those wishing to not waste resin or just wanting a slightly lighter mini.  

This is the first time I've seen this done on a 35mm single piece character mini, so I printed a hollow one for shits and giggles.  The only issue I had is that the wall thickness just wasn't thick enough to prevent the odd hole appearing when I removed the supports. 

Painting

The customary zenithal priming was done and mounted to my base of choice (a two pence piece).  I said he was chunky and barely any base was visible under his girthy feet.

Paul supplied me with a photo of a make by Empire of Minis so I didn't even have to make any colour choice decisions. 

Base colours were a mix of Vallejo Acrylics, with midtones dry brushed on before picking out the highlights.

Serious Skin Problems

I really struggled with the skin on this model, in fact it was practically the last thing that got painted.  The sculpt had no texture and yet he is supposed to be a tortoise like humanoid.  Last time I looked they had pretty scaly lizard like skin and his was as smooth as a baby's bottom.  I have a small collection of greens and they were covering really horribly over the zenithal, particularly where areas of shadow were converned.

 

I persevered though and resorted to mixing in a bit of some Crafter's Choice acrylic that I found in a Wallington "Arkwrights" shop.  

G.. G.. G.. Granville! Fetch me that tube of G... G.. G... Green Paint!

This stuff is so random it doesn't even have a paint name, just a number (PNTA-134) but it's made by Royal & Langnickel and it did the job where my specialist miniature paints could not.  

 

This just goes to show that when you are painting don't just dismiss your art materials because they aren't Vallejo or Games Workshop.  Try out lots of different paints and you just might hit on some secret sauce.

6 Essential Resin 3D Printer Accsessories

I have been resin 3D printing for almost 2 years now and here are a few of the bits of kit which I have found to be invaluable.

Plastic Razor Blade Scrapers 

Nothing gets a blob of resin off your LCD screen better than a plastic scraper.  They don't damage the surface and they are cheaper than actual razor blades.  You can also use them to pry your prints off the build plate and they are disposable so no need to clean them.

Once you have these, you will find they have a multitude of uses around the house for all those DIY projects that they were actually designed for.

Spare FEP film

You never want your printing to be sidelined by a dodgy FEP, so having a spare film is essential for when the inevitable happens.  Changing out your FEP is just one of those skills you will need to master.  Some say that you can tune your FEP for optimal performance, but I just use the German specification gudentight.    I recommend buying from 3DJake.

Fun Fact: FEP is an acronym for Fluorinated Ethylene Propylene.

Silicone Baking Tray

Resin 3D printing is a messy affair, particularly when you are extracting your prints from the build plate.  It is hard to not drip uncured resin onto your table, so I use a silicone baking sheet as a table protector.  

Nothing sticks to silicone and these mats are super easy to clean and so cheap that you can cover an entire table in the things and still have change from a tenner (£10).

PTFE Lubricant (GT85)

Every now and then you will suffer from a print that just wants to stick to the FEP rather than where it is supposed to stick, the build plate.  The best thing I have found to combat this is to give your FEP a good spray with GT85 and a gentle rub down.  This creates a microscopic PTFE layer on the surface of your FEP guaranteeing that the print will release when the build plate rises.

Everytime I change resin, change my FEP or just engage in a spot of cleaning, I give my FEP a liberal coat and then buff it dry.  GT85 will change your success rate instantly, no more failed prints, bits stuck to the FEB or layer peeling.

Plastic Funnels & Conical Paint Filters

Trying to pour your unused resin back into the bottle is a nightmare task made tolerable with the use of a funnel.  Get some conical paint filters to strain out any bits of cured resin and your life will be so much easier and less messy.

The pound store is your best bet for funnels.  You can get a bunch of filters for pennies at the usual online retailers like eBay or Amazon.  A big shout out to Jayo3D who pack 2 or 3 filters in with their 1Kg bottles of resin.

Two Wash & Cure Station Tanks 

It wasn't long into my resin 3D printing journey before my wash tank looked like a winter's morning.  This occurs when the uncured resin suspended in your IPA cures and fall to the bottom of the tank making an amorphous plastic blancmange.  Honestly, this stuff is horrendous to deal with, so having a second wash tank that you can decant into and clean your IPA is a must.  I have found that running a few curing cycles on an empty tank can work wonders. 

Vallejo Shifters - It's all Dust Baby!

In 2023 I managed to snag an absolute bargain of an eBay joblot. I got a metric ton of airbrush paints including this trio of Vallejo Shifters sets.

I've used them on a few models so far but my main gripe is that the supplied swatches don't at all marry up to my experience.  I decided to make my own swatches and to test if it using a gloss black undercoat made any difference to the effect. 

Before anyone shouts "You should have used spoons!", I probably should but my main objective was to have something I could tuck into the box as a handy reference and not have to dig out my cutlery drawer.  Some of these paints don't look anything like what is in the bottle and their names are no help either.

Galaxy Dust

• 77.002 Light Violet Green - A minty coldish green which flips to a greyish purple at about 20 degrees.
  
  
• 77.008 Green Gold Cold Blue - A nice verdant green which flips to a dark blue.
  
  
• 77.009 Turquoise Violet - A really nice 70s blue flake flipping to a solid purple with flecks of irridescent blue. This is the standout colour of the set.
  
  
• 77.010 Emerald Green Mauve - a darker more blueish green flipping to purple.
  
  
• 77.017 Green Silver Blue -almost identical to 002 but a bit more opaque to begin with before flipping to a much greyer colour.
  
  
• 77.018 Dark Green Tin -a really nice warm green which flips toward yellow.
  

Magic Dust

• 77.001 Violet Old Copper - nah, this is definitely a purple to blue shift and it's really quite good doing multiple flips the further away from 0 degrees you get.  Nice.
  
  
• 77.006 Gold Pale Blue - this was way too subtle for me.  It's a greeny gold to begin with and it pretty much stays there.
  
  
• 77.007 Pearl Violet - Purple to a dark grey.
  
  
• 77.011 Old Silver Pale Violet - Another super subtle shift which just goes black to my eyes.  I will chalk this up to a faile in application even though this was the most successful swatch of the three.
  
  
• 77.012 Silver Pink - Is it? just looks Greeney Purple to me.
  
  
• 77.015 Gold Yellow Burnt Orange - Green to a very nice Gold.  Just pipped into second place by 001.  I used this on the cockpit glass of my Swordfish II model and it looks great even if it has a propensity for spiderwebbing.
  

Space Dust

• 77.003 Orange Violet - This is the colour I chose to use on B'lakor's wings and over a curved surface it works quite well.  However, this doesn't cover great and will need multiple coats to get a really pronounced effect.
  
  
• 77.004 Electric Blue Intense Violet - Blue to a sort of purple, just not as successful as 001.
  
  
• 77.005 Green Blue Velvet - I think I might have messed this one up, I'm not getting an effect at all but it is a really nice metallic green.
  
  
• 77.013 Bright Gold Brown - Very subtle but a transition from green to an orangey brown is there.  Perhaps on a larger curved surface this will work quite well
  
  
• 77.014 Old Gold Grey Violet -  I'm just not getting the gold here.  It's another green to purple transition.
  
  
• 77.016 Red Gold - this is definitely a green to gold transition but it is green for a long time..
  

To Gloss or Not to Gloss, That is THE Question. 

I have to say I can't see any difference myself.  However, airbrushing the paint onto a gloss surface made a huge difference when you are actually spraying.  The gloss is a barrier and makes the paint much more likely to pool or to spiderweb.  There is a lot of acrylic medium in the mix which is what suspends the metallic particles, but this takes an age to dry and if you are like me patience is something I have yet to learn...

Overall Opinion

There are a lot of colours which basically look green.  I imagine that there is some perfectly reasonable physics paper which explains how the light refraction effect works.  I will continue to use them and these swatches are going to help a lot in the choices I make.  However, it really does depend on the miniature you are painting and the exact curves on the model to achieve the best results.  

Space marines or any character wearing pauldrons or other similarly curved armour pieces is going to look great using shifters.  Large Armoured Fighting Vehicles (AFVs) with flat panels I'm guessing less so, but I am intrigued to see what it looks like on a windscreen of a car.

Blue Monday

I wasn't planning on making a post today, but when I find something on the interwebs that I think is amazing, I tend just jot it down in here and share it with everyone.

Blue Maps Monday

Tim Hartin has been making his Old School Blue Maps available every Monday since 2022.

What is an Old School Blue Map

Old School D&D modules were famous for their gatefold covers and the ubiquitous blue maps which were found inside.  Fun Fact! this is a well known anti-copy technique using a particular shade of blue called "non-photo blue".  It is also widely used by traditional illustrators to make their initial sketches as the blue will not be picked up in any subsequent scanning or photography stage.

Back in November 2011 I wrote about the various free software options you could use (at the time) to make maps at the "Dungeon" scale maps and included a fun little level editor Tiled 

Sadly the tileset I created is lost to the mists of time, but I will rebuild it and make it better than ever...

Mwahahaha

Scavengers Reign - An Exploration of Xenomorphology

I saw this trailed last year and, as a big fan of the art of the great french comic book illustrator Moebius aka Jean Giraud, I was gobsmacked with how similar in style it looked to many of his amazing strips.

It immediately brought back memories of watching Les Maîtres du temps (The Masters of Time) and I knew I would have to give it a watch.

More than just a Robinson Crusoe Rehash

The story revolves around the lives of three groups of survivors who landed their escape pods on a lush and verdant planet in very different circumstances.  Many of their shipmates have not been so lucky and did not survive to reach the surface, although it is not long before you start to realise that maybe its the dead who are lucky.

The 12 episodes are a busmans guide on how to create a planet full of interesting and diverse flaura and fauna which spends all of its time trying to eat you.  Wrapped around this core survival trope are evolving backstories which explore why each of the very differnt characters chose to thrust themselves out into the great void.

Beautifully animated and biologically complex, the writers have crafted a world which has so much natural diversity and complexity in their life cycles and symbiotic relationships with each other.  This goes well beyond the simple and makes Gieger's Xenomorph look like a children's story book.  

In the same way, the individual backstories of each character are explored in detail from the venal and pathetic Kamen to the strange relationship between Azi and her robot companion Levi.  These are as complex and interesting as their surroundings.  However, sometimes I feel this is designed to lull you into a false sense of security.  Needless to say in these more tender moments their next brush with the disaster is only around the corner.

Traveller Eat Your Heart Out.

This is exactly how I remember early Traveller scenarios going back in the day.  Every scenario was an exercise in exploration and discovering new and deadly lifeforms.  I remember playing those classic double adventures like Shadows or the Chamax Plague and loving them.   

Justifiers - Out of The Mists	Traveller - Shadows

It also brought back memories of running my favourite long dead sci-fi exploration RPG Justifiers.  With only a little modification each of these episodes would make for an entertaining set of encounters for any party.

Is Scavengers Reign Worth Watching?

If you enjoy carefully crafted and beautiful landscapes filled with interesting biology then yes, absolutely.  If you want fast paced action then this is not the animation for you.  If you can imagine watching a 6 hour long Studio Ghibli masterpiece where your own mortality is repeatedly rammed down your throat in the most violent but interesting ways.  Only then are you getting somewhere close to the gorgeous grotesqueness of this show. 

It is rare for a show like this to ever get greenlit or make it past a 30 minute long short so we have to reward the creative geniuses behind the scenes and watch their show.

Jessie's Prints - Episode 33 - The Girl with the Robot Hand

This week, I are mostly been printing... A girl riding a robot hand!!

Trix Robot Rider - Cults 3D 

I found this on EthanTSavage's Cults 3D page and thought it was an awesome sculpt.

The aesthetic is undeniably Anime, and for me is reminiscent of the fabulous Tank Girl comic of the 80s.  Whilst the movie ranks as one of the worst in history, I am a big fan.

I love Giant Robot anime, my favourite being Giant Robo: The Day the Earth Stood Still.  If you haven't watched it you should it's just the right shade of bonkers to make a strange sort of sense and is a blend of diesel punk / magical superhero anime which is incredibly rare.

This was a very quick model to make taking me only a few days to complete.  I used a skull base which I had originally intended for my huge demon model and slathered on the old poundland polyfilla to form a crust over the skulls. 

This is my homage to the famous scene in Terminator 2 where the T800s are walking across the field of human remains crushing skulls underfoot.