Friday 16 April 2021

Pulp Hero - Buller the Wonderdog

 A couple of years ago I played a Hollow Earth game set in the 1920's. 

It was a fabulous adventure which leaned heavily on the pulp serial aesthetic of Indiana Jones, Doc Savage Man of Bronze, King of the Rocketmen, Buck Rogers and Flash Gordon to name just a few.

My character was the intrepid adventuring archaeologist Yorkshire Smith who was never more than a few feet from his faithful Bulldog Buller.  A few weeks before the game began I ordered a set of Bob Murch's 28mm Pulp Figures PHP2 Rugged Personalities which contains 4 iconic pulp adventurers (an Indy, a Doc Savage, a pith helmet wearing British explorer, an American pilot and a bulldog.

Yorkie Smith vs The Doom Turtle
Yorkie Smith vs The Doom Turtle

Whilst I quickly painted my character I just couldn't find the enrgy or inspiration to paint the dog.  I've never been any good at painting short haired animals like horses or dogs which often have their own pieballed patterns breaking up the solid colours of their body.  These are complex and hard to pull off without making the mini look like it's been painted in some sort of innovative camoflague pattern.

This week I managed to crack it with Buller and finally got round to finishing him.

Buller the Wonderdog
Buller the Wonderdog

Now if only I could find where I've stored Yorkie I could reunite him with man's best friend.  

"Buller, go find Yorkie!!"

Monday 12 April 2021

Reaper Bones #35 - Ragnaros, Evil Warrior

The last of my Reaper Bones evil warriors (for a bit), say hello to Ragnaros.

Ragnaros, Evil Warrior - Bobby Jackson (SKU: 77150)

I wasn't terribly enamoured with this sculpt to begin with.  He is basically an acre of plate and scale armour with a couple of skull motifs and a crude shield.  It wasn't until I got stuck in painting him that I decided that the shield was his best feature.

I painted it like dragon scale.  Ragnaros is so hard that after besting a huge red dragon he peeled off the side of it's face and stuck it on his shield (teeth included).  

Totally ridiculous, but then aren't the best fantasy bad guys totally ridiculous? I'm looking at you Damodar!!

Ragnaros, Evil Warrior
Ragnaros, Evil Warrior (SKU 77150)

Bones Progress

Sunday 11 April 2021

Newsround 4th to 10th April

My weekly roundup of news and what I found on the internet. 

Goodman Games Acquires Dark Tower from Judges Guild

Dark Tower Judges Guild Supplement
Dark Tower Judges Guild
 
Dark Tower is probably the most beloved of the Judges Guild supplements originally published back in the dawn of time (1980).  Considered to be a mega dungeon masterpiece it was re-released back in 2007 and original copies command a high price on eBay.  

Thankfully Goodman Games and Judges Guild have done a deal which could see this iconic scenario coming back in a ready to play format with revisions for both Dungeons & Dragons 5e or Dungeon Crawl Classics (DCC).

According to Goodman Games, the new version will be targeted at PC levels 8 to 12 and will include a whole bunch of new material designed to extend this module into a mini campaign.

This is definitely going on my wishlist and something I would love to run at Dragons Keep Roleplay Club using my go to fantasy system Castles & Crusades.

The Other Godzilla Movie You Haven't Seen

 
Shin Godzilla (aka Shin Gojira) was released to Japanese aufiences back in 2016 and takes a more traditional approach to the Kaiju movie.  Whilst the movie does include some top notch CGI it chooses to employ the classic man in a rubber suit approach made popular through the TOHO Studio classics of yesteryear.
 
A peculiar movie with lots to say about the geopolitical dominance of the US and it's shared history and ongoing relationship with Japan.  It's hard to make a Japanese movie about Godzilla without touching on the Nagasaki and Hiroshima bombings, the miltary occupation and the Self Defence Law of 1954.
 
Shin Gozilla by Francoyovich (Deviantart)
Shin Godzilla by Francoyovich (Deviantart)

This movie focuses on the incompetence of the ficticious Japanese Government and the rigid power hierarchy which neuters decision making.  I have seen criticism of the absolute cavalcade of one line actors whose entire purpose seems to be appear deliver their line and then disappear.  However, it does give a fairly realistic impression that in a state of emergency there would be a lot of beuraucracy and conflict in those types of meeting.

I particularly love the Defence Minister (Kimiko Yo) who is itching to unleash the full destructive power of the SDF like a true hawk.  There are some really great moments in this adaptation of Godzilla which make it truly worth the watch. 

The Man who Made Catan 

 
I've been playing a lot of Catan Universe lately and YouTube did it's thing again where it suggests videos from my search history.  It struck gold this time with a mini documentary about Klaus Teuber, the German dentist who designed Settlers of Catan.

The worldwide success of Catan has made this a family affair with both of Klaus sons now also play full time roles in the company.

HMS Evergiven Gets Stuck in Vital Shipping Canal

Unles you've been hiding under a rock for the last week you will be familiar with the plight of the Golden class container ship the Ever Given which managed to get itself wedged between both banks of the Suez Canal.  This one little incident demonstrated how our modern supply chains are so finely balanced that blocking this one canal can bring about massive economic turmoil.

I had to laugh when I stumbled upon the very creative fantasy version created by Limitron and available in both day and night versions on his Patreon.  

I love a bit of nautical action in my Dungeons & Dragons and this is an encounter map just itching to be used in an upcoming campaign.

HMS Evergiven by Limitron
HMS Evergiven by Limitron

Sector 55 Blues - Prog 9 - Scav City and the Pirate King

Sector 55 Blues is a Judge Dredd Campaign using the Savage Dredd unnofficial Savage Worlds Expansion.  This is an online only game with members from Dragons Keep Roleplay Club.

Onward to Scav City 

With Black Ice Kanga and Toecutter riding in their land dinghy Judges Cully, Hammer, Teal and Uhtred ride due south in search of Scav City and the Pirate King.  As they ride they notice that they are being stalked by large dog shaped creatures which periodically reveal themselves on the dune tops both East and West of them.  When asked Kanga says "they're Rad Dogs, like big wolves, dangerous at ground level and smart, real smart.  They hunt in packs."

After 3 hours it begins to get dark and the team decide to stop and make camp.  Teal puts the bikes on overwatch mode set out at cardinal points.  They pitch their tends in a smaller circle with the pirate dinghy in the middle and settle in for the night.  

Several times throughout the night the bikes radar is triggered and on one occasion Hammer's bike fires off 12 rounds from its bike cannon.

In the morning Hammer checks what his bike was shooting at.  Nothing, just a patch of dune which took the cannon burst and collapsed in a landslide.  They pop their Rad Pills, eat some ration bars, pack their tents and head out.  

Day Two

The morning goes without incident, the Rad Dogs are still following them.  At noon they see a cloud of dust and smoke ahead, a vehicle heading South.  Keeping pace with the dinghy it takes an hour for them to catch up to a ragged looking bus filled with fleeing refugees.  The bus slows to a stop and a short stumpy mutant gets out pleading for help.  
 
Mutiville Refugee Bus
Mutieville Refugee Bus
 
He explains they have just escaped Mutieville and they have wounded on board.  The Judges agree to help and Cully administers first aid using her med kit.  The muties reveal that they escaped Mutieville a week ago, fleeing for their lives.  They lost three of their party, Harry, Dutch and Benjy to Lord Muldoons Hair Beast trackers.
 
Two days ago they ran into a pirate ship.  A huge wheeled monstrosity with a big skull for a figurehead.  They were attacked and five of their party were wounded but suddenly the pirates called off the attack and drove off East.  They are heading to Barter Town, the only free town left now that Mutieville is in the hands of Muldoon.  There are no menfolk left to defend it and they women, old people and children who remain are completely at the mercy of Lord Muldoon.  All the able bodied men have been taken to Black Oil Mesa to work the oil fields.
 
After patching up the wounded the bus departs and the Judges continue their journey until nightfall when they make camp just like last night.
 
Five hours after dark all hell breaks loose.  Hammer's bike fires off a sustained burst of cannon fire at something fleeing to the the West.  Langa bursts into Cully's tent screaming "They got the Toecutter... Dinosaur...  snatched my... first mate.
 
Hammer jumps on his bike and fires the cyclops laser into the darkness.  The laser melts a channel through the dunes like a hot knife through butter.  It illuminates the dunes and the Judges get a  brief glimpse of a pair of Rad Dogs howling atop one of the dunes 300ft away.  Returning to her tent Cully discovers a terrified Kanga cowering in fear.  
 
Slapping him across the face as directed in section 215 of The Book of Law (Disaster Response and Civillian Casualties) she shouts at the visibly traumatised pirate "Pull yourself together you scurvy dog, are you positive it was a dinosaur?"

Hammer and Teal examine the bird like three toed tracks which came from the South, made a beeline for the pirates and then a 90 degree turn exiting East.  A trail of blood accompanies them and as they enter the dunes they find a severed human leg bitten off at the thigh.  Whatever took Toecutter was big and fast.  Even if they could find Toecutter in the darkness he would have bled to death in minutes.  
 
The team decide to abandon the dinghy and ride through the darkness with Kanga riding pillion on Teal's bike.  As the sun rises over the horizon the rusty tangled scrap heap of iron that is Scav City looms in the distance.
 
Scav City
Scav City

An Audience with The Pirate King  

The bulk of Scav City is not a permanent fixture rather it is a jumpled mess of pirate ships clustered around a central fortified tower.  The Tower itself is protected by ramshackle walls made from scrap iron and cars with a large oil filled moat encircling it.  The walls are festooned with spikes and sharp rusty iron blades making it look like a hedgdehog squatting in the desert. 
 
As the Judges ride over the drawbridge they are surrounded by armed pirates brandishing swords, spears, harpoon and crossbows.  A man carrying a ping laudry basket orders them to put their weapons in the basket.  "Noone sees the Pirate King carrying a weapon... It is the Pirate Law!!"  

Teal makes a point of telling the man that if anyone touches his gun other than him... "it will go boom!!"

Pirate King Barbossa
The Pirate King
The Judges are led into the tower and into a throne room lit by hundreds of oil lamps and candles.  On the throne sits an old pirate.
 
"Welcome Law Men.  Thank you for returning Kanga to me, I will deal with him later, but first I want to raise a glass and discuss what you are doing in the Cursed Earth.  Yo Ho Ho a bottle of Rum"
 
"Yo Ho Ho, fetch a bottle of rum and five glasses!!"  he shouts at one of his attendants who scurries off and returns with a shiny chrome car hubcap carrying 5 shot glasses and a bottle of rum.
 
"Everybody out!!  I will parley with the Lawmen alone." bellows the Pirate King.

An Old Judge and a New Law

With the room cleared the Pirate King explains his problem.
 
"Muldoon is a threat to Scav City.  He's taking over this part of the Cursed Earth and we don't have the firepower to defend ourselves.  There's an old lawman outpost North of here.  If you were to gain access with my men then we could get weapons and defend ourselves."
 
Judge Hammer thanks the Pirate King and extends a hand in the universal sign of friendship.  The Pirate King does likewise and Hammer grabs his hand turning it over to reveal the fading Justice Department ID tattoo on the back.
 
"You are a Judge!" Hammer exclaims.  "A long time ago maybe, but I learned that you can't teach Mega City Law to the Lawless.  You need a new Law.  Pirate Law.  I am old and won't be around for much longer and I need someone who can replace me.  Think you got the cojones boy?"
 
"Twenty men and two ships crewed by my best captains.  What do ya say? Do we have a deal?"
 
The Judges ponder their a situation.  Muldoon has the perp and perhaps the outpost has equipment they can use to get in and neutralize Muldoon and exfiltrate Nesbitt.  They reluctantly agree.

A Pirate Shindig

With a deal struck the doors to the throne room are opened and a throng of pirates enters bringing food and drink.  The Judges are introduced to the two captains who will be accompanying their expedition Scurvy Jack and El Diablo.  
 
As the revelries continue Teal notices one shadowy figure who appears to be surfing tables grabbing half finished drinks.  He corners the figure and engages him in conversation.
 
"The names, Cross Eyed Jethro.  I knows Muldoon's secret, He's like you from the Mega City.  Get me on your excursion and I will tell you everything.  The Pirate King has never met Muldoon, but I know him well." 
 
Teal tells the Pirate King that he wants Jethro on the expedition to which he agrees.



Next Prog ->

Back Issues

Prog 1 - Suits You Sir - Mosh 55 rob Zlooty Slute's Suits You and a body is discovered.

Prog 2 - Hair Today Gone Tomorrow - Rock Dwayneson's apartment and carnage at the Yes-A-Bout

Prog 3 - It's Ugly Out There - Fun and Games at the Ugly Pageant 

Prog 4 - Down, Down, Deeper and Down - Entering the sewers under RESYK

Prog 5 - The Big Wig - Confronting the beast below the city

Prog 6 - Last Orders at The Two Ways Pub - A shootout in Sector 163

Prog 7 - Into the Cursed Earth - Judge Ezquerra orders a manhunt 

Prog 8 - Avast Me Hearties It's the Easter Pirate Kangaroo - Black Ice Kanga



Wednesday 7 April 2021

I Printed a Grail Item - Judge Dredd Helmet

When I got my new printer I knew that there were a few grail items that I've always wanted to own but was too afraid to print.  

I am running a Judge Dredd campaign for my Friday night role play club in South East London (Dragons Keep Roleplay Club), so I took the plunge and printed a Judge Dredd Helmet.

3D Printed Judge Dredd Helmet
My 3D Printed Judge Dredd Helmet

Cutting up the STL File Using Meshmixer

I downloaded a model from thingiverse by user 3DPrintSolutions which had been cut into 4 parts but still was too big for my 200mm square print bed.  The solution was to download meshmixer and split each print in half again for a total of 8 parts.  These would then go together in two rings of four parts each.

Help I Need Some Support... Material

The bottom ring had virtually vertical walls so I opted to print without support material and arranged the prints on the bed to minimize any stringiness which was largely avoidable.  I knew I would have a lot of clean up so a few dody edges could be fixed with bondo in post processing.  This got the print time down to just under 4 hours each.

The upper ring is mostly dome so I new I was going to need a lot of support.  The first print I did had support set to 15 in Cura and this took over 10.5 hours to print.  Reducing this to 5 got the other three parts to print in between 7 and 8 hours each but did result in a bit of loose stringing on the inside.  As they say "it don't need to glow if it ain't on show"

Judge Dredd Helmet - Printing a dome part
Lots of support needed to print the domes

You can see why I was reticent to start a project like this.  With nearly 60 hours of printing (including the odd failure) it is my biggest print to date both in size and in time.


Judge Dredd Helmet - 8 Parts Printed
Judge Dredd Helmet - 8 Parts Printed

Filament, God Awful Filament

I've had this PLA filament knocking around since January last year and one reel has been open to the elements all that time.  This is probably not the best PLA to use, but it's what I've got and it needs to be used up.  I've never been one for colour matching filament and this filament is a gorgeous shade of poo, I mean chocolate brown. 

The finished print is going to need a skim coat of plastic body filler to smooth out the layer lines so the filament colour is completely irrelevant in any case.

The other thing with this filament is it needs to be hot, 220 degrees hot and I printed some of the earlier prints at 210 which caused some under extrusion which needed fixing. I pulled out the trusty 3D Pen which is ideal for this sort of touch up work and started meshing in some extra plastic SANAGO style.  I also resorted to the old superglue and baking powder trick to fill some of the more heinous gaps in the print and give the cracks some filling.   

My old man was raving about some glue he had bought recently and so he sent me a care package from Amazon.  It ended up being Mitre Bond Superglue & Activator which I had been trying to find on eBay and Amazon for ages but didn't know what to search for.  Apparently accelerator is not the right phrase.

Assembly and Post-Processing

I assembled the first two prints before the third had even come off the printer as I was anxious to see if the parts had warped during printing.  Everything was okay, well reasonably okay, fixable okay and so I held off further assembly until all the parts were printed.  I taped the parts together in the interim to give me a psychological boost to keep going and to also get a handle on just how big this is.  

Judge Dredd Helmet - Taped Together
Judge Dredd Helmet - Taped Together

I think that this is incredibly important, especially when you have prints that fail inexplicably and you have to restart a 30 or 40% complete job twice over.  3D printing is not a fire and forget process and I learned quite a bit about my new printer in the process.  This is only its third or fourth project and even though it is almost identical to my previous Prusa i3 homage, it's a little bit different in construction and behaves slightly differently.  It is as much about dialling in the user as it is dialling in the printer. 

Post processing is a laborious and crappy job.  Another reason why I put off printing something so large.  Fortunately this model is large areas of smooth surface with gentle curves rather than lots of fiddly detail and tight tolerances.

The bloke who glued the parts together (me) did a crappy job and so I had to use plenty of bondo (car body filler) to smooth out all the joints between the parts and fill in the layer lines on all surfaces.

Somebody Closed My Halfords!!!

A slight rant here but I wandered down to my local Halfords which is 10 minutes walk from my house.  I say IS but I should mean WAS as thanks to COVID, the powers that be decided to close the store for good and it is now a DREAMS Bedstore.  Now I am sure that they had sound financial reasons for it but it does mean that there is now no consumer auto spares store in Orpington.  So rather than drive to the nearest alternative store which would be in Bromley I did what 99% of the population are going to do.  I bought it cheaper off Amazon or eBay.  

I think there is a morale in this tale about the death of the high street but I can't for the life of me guess what it is. 

Judge Dredd Helmet - Big Boy Bondo Time!
Judge Dredd Helmet - Big Boy Bondo Time!
 
I also smoothed out the inside surfaces adding a bit of thickness to the entire helmet but mostly the bondo was needed to level out the discrepencies between the different sections where they meet like the four corners monument
 
Once you've applied the bondo get ready for a lot of sanding.  Use a sanding block to make your life easy.  I bought mine at poundland years ago and it is the first time I can hand on heart say it was an indispensable tool.  I could have spent months sanding the surface to get that perfect finish but lets face it I'm an impatient sort of guy and I wanted this helmet finished before my game ended or lockdown was lifted.

Painting Your Helmet

I went the cheap and easy route using black matt and gloss car paint bought from poundland and a red gloss from Wilkos.  All in the paint cost me less than a tenner.  The gold paint was a bottle of miniature paints gold which I have had for the best part of 25 years and it is still good.

Once you have done this you just need to fit the visor.

The Visor

There seem to be two types of thought on visors either stay true to the comic book and half a two tone visor or go with the Dredd movie look which is all black.

The model also comes with a printed visor which to be honest is probably a good thing as it ensured correct alignment of the nose guard X during assembly.  This was removed once the helmet was complete and replaced with one a sheet of acetate covered with one way black film.  After all you can't have the perps seeing your eyes (or in my case my spectactles).

Comic Book vs Movie visor comparison
Comic Book or Dredd movie visor (which do I choose)

The concesus also seems to be that the best way to replicate this is by buying cheap motorcycle visors from ebay and hot gluing them in.  The only problem with this is size.  Motorcycle visors are meant to go on the outside of a helmet not the inside so the curvature is all wrong.  I also had no idea what size I needed so I just went for a JDC one size fits all visor (eBay / Amazon).

I cut out the eye holes with my knock off dremel using an abrasive cutting wheel.  I cannot stress how important it is to wear a safety glasses when doing this.  The little cutting wheels have only one mission in life and that is to shatter fling shards of abrasive right in your face.  Fortunately I only managed to break one "Wheel of Death" and with the eyeholes removed I made a paper pattern adding a generous half inch to all sides but the bottom.  I used spray adhesive to stick this to the visor on top of the removable plastic scratch cover and then dremeled it out.  

As you can see in the picture below I stuck this on upside down.  The visor has a curved bottom edge and a flat top edge.  You want the top edge to form the exposed edge of the visor on your Dredd helmet.

Judge Dredd Helmet Visor template applied
Paper template stuck on visor upside down.  Just big enough

Interior Padding 

This was a relatively easy job just hot gluing in sections of EVA foam tile.  This is a cosplayer's go to material and can be bought as workshop flooring or playmat flooring inexpensively on Amazon or eBay

Interior reinforcement and padding with EVA foam floor tiles

How Much did this 3D Printed Judge Dredd Helmet Cost Me?

Here's an estimate of the costs

  • Filament - £15
  • Electricity - £10
  • Bondo - £9
  • Visor - £10
  • EVA Foam - £8
  • Sandpaper - £3
  • Paint - £10
  • Glue - £8 

That's a total of roughly £73 which is about the same price as a raw fiberglass cast helmet from eBay.  A finished helmet will set you back at least £150 and you don't have any of the enjoyment of getting there or the enormous sense of satisfaction when the project is complete.

I posted a couple of pics on Whattsapp and a friend immediately asked

"Can you make it reflect flames like in the Dredd movie?"

The answer is most definitely Yes.

Judge Dredd Helmet - Reflected Flames

So What Other Grail Items Are on my Bucket List?

I've already printed a Han Solo DL44 Blaster, one of my earliest prop projects and a Judge Dredd Badge.  I even did a custom one for one of my players in a previous Judge Dredd RPG campaign.

As a Sci-fi fan there are a number of iconic weapons that I 've always wanted to own including:

  • An M41A Pulse Rifle from Aliens
  • A Bladerunner Deckard Blaster
  • A Lawgiver - there are 3 to choose from Comic Book / Judge Dredd (1995) or Dredd (2011)
  • A Hellboy Samaritan revolver
  • An Outlaw Star Caster Pistol (as used by Gene Starwind)

 I also want to print some of those iconic droids like

  • A life size R2D2
  • A C3PO head.
  • An ABC Warrior Skull from the 1995 Stallone Movie Judge Dredd
  • A life size Han Solo in Carbonite

But those are all going to have to wait until I've recovered enough to consider taking on a mega project like this again.